Find an experienced deck painter in Leichhardt

We have just had our deck extended. Existing deck is square approx 3m x 5m. New deck about the same with steps. Existing deck has been nailed, is in good condition, has been sanded by me with DIY belt sander and Orbital about a year ago prior to last oiling, but needs sanding to remove “haze” so it is as close to new deck as possible. Nail heads on existing are pretty flush, I hammered them down before last sanding, Ozito belt sander didn't really like the nails tho but a commercial belt sander will probably glide over! New deck has been installed with countersunk screws, needs light sand before I oil the whole thing. I have hit it with Sodium Percorbonate and Oxalic Acid twice so should be ready to go.

High pressure clean and restain of timber deck, approx. 4 x 3 m sq All materials provided

Deck is 8 X 4 meters (approx.) Needs to be sanded prior to oiling - we want a quote for sanding - Due date: Flexible

Sandblasting and oiling timber deck - Due date: Needs to be done on Wednesday, 27 September 2023

Need the deck sanded back so it’s smooth and ready to be repainted. - Due date: Needs to be done on Sunday, 30 July 2023

Sand 1 medium deck (top is 2.28m x 1.6m) + deck sides + stairs + side of stairs. Stairs require a heavy sand on top to remove dog scratches. Sand 1 small deck (1m x 1.79m) with one stair and 2 x stringers. Remove existing stain (previously Cabot’s Aqua Deck) in sanding process. Preparation (sanding) is viewed as important. Apply two coats of Feast & Watson timber deck stain to all sanded surfaces. Supply all decking stain and application tools. - Due date: Flexible

Clean and oil decking area using Cabot’s natural decking oil. - Due date: Flexible

Outdoor deck 265cmx480cm (not much sanding needed) Atrium deck 300cmx420cm (needs a sand) Front deck 250cmx195cm

We need our deck sanded asap. Located in Leichhardt. Access via back laneway entrace. Deck size is approx 5.5 x 3.5m with a side section measuring approx 2.7 x .70 metres. Photos attached. No staining is required, just sanding. - Due date: Flexible - Due date: Before Friday, 11 November 2022

Too busy - HELP!!! The Job: 1. Clear leaves out of rear and front gutters (15m total length). You will need long / extendable slide ladder (~4m off ground- standard ladder too short). Gloves also suggested. 2. Put 1x coat of decking oil onto non-spa half of small deck (3x 3m) and adjacent small set of stairs (5 steps). Decking oil, applicator and cleanup turpentine provided. Probably 60-90 minutes work, needs to be done on a dry day with no rain imminent.

The deck needs sanding and staining / oiling (happy to take advice on this), and the front part has been discoloured through sunlight. The deck is 4m x 4.5m and the timber is in otherwise good condition, is only around 5 years old. We are looking for a professional with plenty of experience and own equipment (and provide the materials) and reviews for previous work. Also we have guests over the long weekend so need to find someone who can do before then. Thanks! - Due date: Before Thursday, 29 September 2022

james hardie deck to be sealed - Due date: Needs to be done on Monday, 19 September 2022

looking for someone to do a final light sand and seal on a James hardie deck I have completed in a job in leichardt. the decking is a composite fibre cement decking board. will need a light sand in some places but pretty much ready to go. I can supply the sealer and tint. pictures attached. cheers

Sand deck ready for oiling and side path - Due date: Flexible

I have 30 square meter deck in an indoor pool that need cleaning with specialty product as it has mould on it. The deck was treated in Dec 21 for anti slippery products but I’m not sure why mould come back after only 4 months

The deck has been laid out with hard wood, and was sanded back and had one thick coat of cutek oil about six months ago. It’s the courtyard of a small terrace house so it’s around 20 square metres - small. As you can see it’s extremely worn. The exact same thing happened six months prior. Not sure if it’s the type of oil someone has suggested using a water based. Need someone to sand and do a coat, providing their own equipment. There is a back entry point on a lane way, perfect for parking and access. Thanks !

There are 2 areas of the deck. COVERED AREA. 26m² - Sand back timber deck flooring Apply 2 Coats Cabot's Acquadeck. UNCOVERED DECK. 22m² - Decking timber. Wash with Deck cleaner. Apply 2 coats Acquadeck. - Due date: Flexible

I have a deck that needs sanding. I am going to do the oil myself. The person would need to bring sanding equipment. I began the job but have decided it probably is best done with industrial sanding equipment. Or alternatively do a better job than me with the Ryobi Belt sander I already have.

Sand and stain small deck and stairs, approx 15m2 total

We have a small deck - approx 3x4m - as well as an entry porch and small set Of stairs, that we need pressure cleaned so we can oil afterwards. I don’t have a pressure cleaner though so you will need to bring one. We will provide the deck cleaning chemical. I’ll need it done on Friday morning please.