A white van parked on a street, with a person standing next to it, ready to load or unload items.
A white van parked on a street, with a person standing next to it, ready to load or unload items.

Find a professional Villaboard contractor in Sydney Eastern Suburbs

Fill in a short form and get free quotes for local Villaboard contractors in Sydney Eastern Suburbs

4.5

Excellent rating - 4.5/5 (9200+ reviews)

Get help from a local villaboard installer

  • Bathroom walls
  • Waterproofing
  • Painted villaboards
  • … or anything else
It only takes 2 minutes. And it's free.
Up to 50% cheaper than franchise dealers
No job too big or small
Free insurance coverage
Secure cashless payments
Same day or next day service at no extra cost

Best rated Villaboard installers near me

Recent Villaboard Installation reviews in Sydney Eastern Suburbs

Anthony and his team had done a great work. He come on-time, very polite and professional. The work is done great, definitely will re-hire him again and would like to recommend anyone want to do any building work. Thanks.

Repair rotted studs and install villaboard

$650

Great job, efficient

Laundry Wall Villaboard Sheeting and Rendering

$500

Adam was great. He went above and beyond and also provided some amazing advice for future work to be done on our house.

Plasterboard/Villaboard Fixes + Help with Sink/cabinet Replace

$500

What's the average cost of a Villaboard installer in Sydney Eastern Suburbs

$437 - $662

low

$437

median

$565

high

$662

Low, median and high bar chart distribuiton

Average reviews for Villaboard Installation Services in Sydney Eastern Suburbs

based on 3 reviews

5

3
0
0
0
0

What is Airtasker?

Post your task

Post your task

Tell us what you need, it's FREE to post.

Review offers

Review offers

Get offers from trusted Taskers and view profiles.

Get it done

Get it done

Choose the right person for your task and get it done.

Now Available
  • Get it done now. Pay later.
  • Repay in 4 fortnightly instalments
  • No interest
  • Available on payments up to $0

What does a Villaboard installation include?

Your installer can help with every step from advice on the best materials through to the actual Villaboard installation. Here’s what you can expect:


Villaboard wall installation

Your installation professional will start by helping you choose the right type of Villaboard sheeting. 6mm is standard for residential applications, while commercial applications usually use 9mm or 12mm in heavy-duty situations. If your existing wall sheeting needs removal, they’ll assist with this, but otherwise, they’ll get straight into measuring the space to determine the best placement for your Villaboard installation. Your installer will add internal angles into any corners before they start. They’ll work from ceiling to floor, so they’ll need to start by installing a nail ledge on the joist to rest the top sheets on. Lifting and installing Villaboard is a two-person job because they’re very heavy materials. They’ll rest the panel on the nail ledge, slide it into place, and nail it into the studs. Once the top row is installed, your installer will add the bottom row, staggering the sheets to avoid floor to ceiling join lines. If a panel needs holes for electricals or plumbing, your technician will mark and cut these holes before installing. If they need to cut smaller pieces, they’ll use a special cutter to cut the board down to size. Your installer will continue working until all gaps are covered. Finally, they’ll patch up any joints and nail holes by applying coats of compound and paper tape, smoothing the surface as they go.


Villaboard ceiling installation

Installing Villaboard ceilings is a similar process. Your installer will use both nails and adhesive to secure your staggered sheeting to the framing. Once both your ceilings and walls are installed, they’ll finish off the joints and corners and cover up nail holes with compound. Then they’ll install regular plaster cornices using adhesive and setting compound.


Villaboard repairs

Villaboard is a tough material but it can sometimes need repairing, especially if you’ve removed tiles from the surface during a renovation. If it’s a very small hole, crack, or scratch, your technician may be able to use compound to patch the surface. But if it’s a larger hole, your technician will cut around it to make a clean shape, then they’ll cut a matching shape from wood to fit into the hole. They’ll secure this with stud adhesive and screws before covering the surface of the wood with gyprock compound. Once dry, they’ll sand this back to smooth, vacuum away the dust and apply a thin topcoat of compound. Finally, they’ll sand once again and it’ll be ready to paint. 

Recent Villaboard Installation tasks in Sydney Eastern Suburbs

Villaboard installation

$123

Coogee NSW 2034, Australia

26th Jun 2023

Need about 50 sqm of villaboard installed at a shop front under the awning. Work also has to be done at night time, but flexible. - Due date: Flexible

Plasterboard/Villaboard Fixes + Help with Sink/cabinet Replace

$500

Coogee NSW 2034, Australia

20th Feb 2023

I need some simple plasterboard/villaboard work done + help with setting up a base cabinet under a sink First image shows the room that needs simple villaboard work. On the far wall, cut out 1/2 metre of plasterboard and replace with villaboard & seal. Second image shows exposed piping on right hand side. Need to enclose this with villaboard and set up the sink (using existing counter top) on top of new base cabinet. Then seal/caulk. Last image show what the sink looked like before... we should aim to have it look like this again (but with new cabinet) - Due date: Needs to be done on Thursday, 23 February 2023

Adam was great. He went above and beyond and also provided some amazing advice for future work to be done on our house.

Repair rotted studs and install villaboard

$650

Kensington NSW 2033, Australia

10th Feb 2022

I am renovating a small bathroom (2.8m x 1.5m), I have already removed the tiles and old villaboard. there are two base studs are rotted by water leaking. The tasks: - Repair rotted studs (remove the rotted stud and replace it with new one) - Re-install villaboard (3 walls only) - Remove a stud wall (1.5m wide x 2.4m height, tiles has already been removed) between toilet and bathroom, so it will become one bathroom (currently, the toilet and shower are separated by a plasterboard wall) - Remove a plasterboard wall (1.5m wide) and stud between two rooms, so two rooms will joint together It would be great if you have a trailer to remove all the rubbish. I will provide all materials. I will help you to do the work together if need. - Due date: Flexible

Anthony and his team had done a great work. He come on-time, very polite and professional. The work is done great, definitely will re-hire him again and would like to recommend anyone want to do any building work. Thanks.

Laundry Wall Villaboard Sheeting and Rendering

$500

Bondi NSW, Australia

23rd Jan 2021

Looking at: 1. Rendering flat the exposed brick area left of window frame, approximately 135cm x 15cm 2. Creating wooden frame and Villaboard sheeting to cover exposed plumbing/pipes, approximately a 135cm x 27cm x 13cm frame. Please see pics for old existing frame that has been dismantled and the exposed area underneath. This quote must include: - Rendering smooth including tools and render material - Creation of 2 x wooden rails that attached to concrete wall including materials, can use of one of the existing rails pictured. - Villaboard enclosure attached to wooden rails, taping, plaster waterproofing, and sanding. Your quote must include all tools and materials including villaboard and labour with nothing more to add. Please see pictures.

Great job, efficient

Patch 3 holes in villaboard lined walls

$200

Bondi NSW, Australia

23rd Aug 2020

Patch 3 holes, made due to minor electrical and plumbing works. Quote to include all labour, materials and tools - patching to include three tape and set coats, ready for painting. (paint by others) Approximate size/dimensions Hole 1 - 15 x 15cm Hole 2 - 28 x 29cm Hole 3, T'shape - 66 x 21cm & 28 x 47cm