Find an experienced handyman in Petersham

Mount hooks in joinery cupboard x 2 Patch and paint small joinery bulkhead Hang ikea floating shelves x 2 Mount towel hooks on back door x 2

Mounting 3 shelves and a TV mount to our living room wall. Needs drilling the holes and placing the shelves and TV mount at the right place, similar to attached picture. Very small task for someone experience and well equipped. Total of 10 holes requires to finalize the job. No need to clean.

I’m looking to see if anyone can repair one of my shoes. The front has come out of its stitching. They are expensive barefoot shoes and I was going to see if someone could repair it instead of buying a new pair. It would have to be repaired so that there is still space at the front of the shoe. I’m not sure if it’s possible, but if it is and you want to do it then that would be awesome! :D Thank you, Calem:

I have a large photo frame and a smaller A3 frame that need hanging. All artworks have a wire or teeth. Have heavy duty command hooks for large print, not sure what I need for smaller print with teeth but can’t damage walls. Needing help with applying strips, aligning, hanging etc

Hi, I’ve locked myself out and just need a handy and agile person with a ladder to climb over my fence, then open the front door. Should be a 15 minute job! In the image you are climbing over the metal fence where the shrub is.

light work available: and in tandem, so it's easy; and efficient. We've completed all major works on site - just needing another pair to frame, and a pair to cut. Current tasks left is: • screw beams* in straight • cut beams* to fit A timber Cutter, a Framer, or a pair, of both, needed. If you have a capable friend, they are welcome. All Tools Provided. Off hours work available. Paid daily. Any builder or apprentice worker with capable hands is welcome - need extra hands from people looking for easy work.

If you and a friend or colleagues are interested in easy work: - Cutter to precut; - Solo (or a *pair) frame *for speed. Beam Cutting & Frames built in tandem, Looking to do a full day at first. AND... Looking forward to re-recruiting capable hands for further work. All tools provided! Or if you have tools; great! Bring 'em in. You rock up and knock the beams in. Or sit and slice. Easy work; we're searching for a few good hands to help with the easy part now that all major works have been completed. If you have any questions; requests or suggestions - reach out at any time.

I need to install a door to the Jamb, including Attach 2 x hinges flush to the door (provided) installing the handle on the door, and including installing the strike plate to the jamb. (I had to repost as something went wrong with the previous post.)

Tasker Easygoing, Ongoing Work These are easygoing builds, all indoors; simple timber work. No heavy lifting. Fun team of people; good energy in the room! Coffee & Tea Provided Currently: creating timber frame / stud walls. (Picture attached, for reference.) Looking for a helpful, handy human (or a team of a few) to assist us. Must-Haves: • Building / Carpentry Experience • Knowledge & experience using Power Tools Optional / extras: • Have your own tools (impact driver / circular saw, etc) • Have a vehicle (ute/van, etc) of your own Searching for: * Experienced Cutter. (Circular Saw/Drop Saw options) to measure and cut beams to fit. E.g. 1. Beam is 3m 2. Cut to 2350mm. 3. Measure next beam & prepare to cut. ✅ * Experienced Framer (Nail gun or screws with Impact Driver options) to fit the beams to frame requirements. E.g. 1. Take 2350mm beam. 2. Connect to 'floor & ceiling' beam. 3. Measure next beam required & call out to cutter. 4. Take next beam. ✅ * Experienced Gyprock & Plasterer (Sheet the pre-built frames; Plaster & Sand) E.g. 1. Apply Stud Adhesive to frame & Gyprock 2. Nail in the Gyprock & apply Plaster Tape 3. Plaster the joins 4. Sand down plastered Joint ✅ ---------- Please Note ----------- Not looking for overqualified (or overpriced) labour - please see other listings for heavy work. Lightweight work, always indoors. Please note this is not bricklaying or concrete & steel works outdoors in the sun. This is light, indoor work in a relaxed atmosphere with good people. We have all of the tools, materials & knowledge required - looking for a few helpful hands to assist - currently on simple timber framing. Coffee & Tea Provided If you are (or have friends who are) carpenters / builders / sparkies / plumbers / - either get in touch in the comments and we'll endeavour to connect: FLOW STUDIOS Camperdown

One area of the house. It is about 47 cm wide and 35cm long

Construct new basketball hoop and remove old one

Small job - should take circa 5-10 minutes

I need a dent repaired in my car. - Due date: Flexible

I need someone with a drone to take pictures of one of the corners of my roof where there is damage, and to check if the gutters are blocked. - Due date: Flexible

we have a small bathroom window that we would like the glass replaced and fly screen mesh added to the window as it does not currently have a fly screen. The window winds open and closed. We need someone to supply the materials and install. It’s approx 85 cm x 40 cm - Due date: Flexible

Hi there, We have a number of odd jobs around the home that we won't be able to get done ourselves pre-Christmas. These are: Installing a roman blind (approx 1 metre wide)* Installing a curtain rod* Hanging an 80cm round IKEA mirror* Securing BILLY bookcases to wall* (120cm wide, 202cm tall) Mounting a small towel holder to laundry door * = masonry wall You would need to supply screws and fixings, so please quote accordingly. Many thanks, Ellen - Due date: Before Sunday, 17 December 2023

Handle will no longer put plate into door recess - Due date: Needs to be done on Friday, 1 December 2023

We need the coat rack secured into a plaster and brick wall. We want the hooks to be strong enough to support the weight of heavy coats and bags.

I need a 65 inch Samsung Frame TV professionally wall mounted / installed. The TV comes with its own mount. It’s a static mount / does not articulate. I also need a saw to cut a small / thin piece of dowl for an unrelated project. The dowl is only 16mm thick - Due date: Flexible

I need a handyman to: 1. Adjust hinge on large kitchen cabinet door. Hinge needs to be moved and then current one patched. These are new hinge - kitchen only 12 months old 2. Attach a door opening bin to inside of cabinet door 3. Use a stud / pipe finder to install some hooks to wall, you must supply the tool to ensure you don’t hit wiring / plumbing 4. Ladder needed to adjust a patio ceiling light cover that’s coming loose, simple adjustment. No electrical issues it’s just the light cover. - Due date: Flexible