Book a professional blind repair service in Sydney

I need someone who knows how to cut down wooden venetian blinds - width not length - and metal headrail by approx 300mm and install into a recess window. Should take an hour.

Two roller blinds need repair. Roller mechanism is jammed on the bedroom blind. Chain broke on lounge room blind.

Need white pvc blinds that are currently 180cm wide cut to 177cm wide with mitre saw plus install to window lenh Is 150cm which is fine

Install 3 blinds 2x90cm 1x180cm

I have installed one bracket for the Ikea roller blinds, but I need the other one installed. The other side is partially installed but I cannot screw them in because the screws are damaged and won’t completely screw in securely, so the screws will need to be removed and new ones put in (I have replacement screws). It should be quick, it is just the removal of the broken screws without damaging anything that is the hard bit.

the window cords are broken, I can not pull it up or down properly, must be replaced

The chain on the roller blind needs to be retreaded onto the roller blind wheel. May need new roller blind wheel (unsure till removed to check track)

Fix/Install beads to the roller blinds.

EASY FIX Just needs a new continuous chain at an exact length the chain broke and just needs to be replaced "continuous" chain ~ length is in the photo and written below I might be off by a ~ centimetre in length (& btw the length is measured straight in one line ie because the chain is broken and open straight chain) A continuous loop roller blind chain ( 4.5 mm 147 cm) is needed because you can't use a noncontinuous chain as the space is too tight for a connect link to get through the guard next to the cogs Yes I put the blind back up and the springs loaded properly everything is fine it just needs a continuous chain which I can buy online anf install myself if I can find the exact measurement the reason it has to be the exact measurement is there's an electronic blind attached to the wall and I don't want to have to reattach the electronic blind device to a different height on the wall to fit a different chain length

I need a roller blind installed, old brackets removed and new curtain brackets installed on the same window.

repair roller blind (bead type cord)

We have two roller blinds - one is 1552mm in length the other is 2356mm in length. Both have a drop of 2682mm. The blinds were bought from half price blinds and were pre installed with Eve SmartMotion, they are measured to fit as a recess fit in our bedroom window. Secondly I have a Samsung Frame 55” TV that needs removing off one wall and then remounted on the opposite wall and ideally the cable (not the power one) hidden behind the wall.

The metal Mechanism in the blind to pull up, the strings has come un attached to the bracket. The blind slats are completely up and won’t come down.

Install day / night blinds in kids room. Not recessed. Brick wall (I think)

Clip on blind has detached from the sockets that are screwed into the roof. I need help reattaching the blinds. A ladder and potentially screwdriver / drill kit will be necessary for the job

Remove two curtains and a curtain rod and install roller blinds. Plaster or fill holes left by curtain rods

Installation - two roll blinds in an office - Due date: Flexible

Need install blinds where my windows are, these are manual ones, you pretty much just need to screw in the blind holders, all work will be done in apartment. Note: there are bricks so the drill will need to be able to make a hole in the brick - Due date: Flexible

Screw brackets into wall Above window frame to hang 3 blinds Time: any day before 3 Jan. Complete before 9.45am any day but let’s chat - Due date: Before Tuesday, 2 January 2024

Install 1x block out roller blind. - Due date: Needs to be done on Friday, 29 December 2023