Find experienced awning repair handymen in Baulkham Hills & Hawkesbury

It’s an awning outside the cafe. One of the arms is broken. The awning is about 9metres long. If possible to replace the arm. Thanks

Colour match and Replace 6 pull down fabric awnings as per photo. No need to replace 3 small round ones on second floor - Due date: Flexible

The budget is flexible and I'm OK to pay hourly rate if that's easier. 4WD accessories need to be installed to a Mitsubishi Pajero NX 2015 Exceed LWB (https://www.carsguide.com.au/mitsubishi/pajero/price/2015/exceed-lwb-4x4). The car has flat roof rack installed already (https://www.ocamindustries.com.au/aluminium-roof-rack-for-mitsubishi-pajero-2007-current-full-length-alloy-flat). Also, there's a roof top tent already attached to the roof rack (most likely has to be moved approx. 10cm to the driver's side to accomodate the awning on the passenger's side, https://www.arb.com.au/esperance-rooftop-tent/). New accessories to install: 1. Drifta Stockton 270 2.5m Freestanding Awning (https://www.drifta.com.au/product/drifta-stockton-270-2-5-freestanding-awning/) 2. Kaon Light Cargo Barrier (https://www.kaon.com.au/light-cargo-pet-barrier-to-suit-mitsubishi-pajero~404) 3. Kaon Rear Roof Shelf (https://www.kaon.com.au/standalone-rear-roof-shelf-to-suit-mitsubishi-paje) 4. Kaon Rear Door Drop Down Table and Pocket Cages (https://www.kaon.com.au/rear-door-cage-table-mitsubishi-pajero) Optionally to install (if time/budget allows): 5. Light bar (to the front of the roof rack) 6. UHF radio unit (external antenna is already installed) - Due date: Before Tuesday, 19 December 2023

I have a Windoware 3 x 2 awning from Bunnings that needs mounting to a brick wall. I've bought the masonary bit required. Apparently it's easy. Let me know how much you'd want to do this job. - Due date: Flexible

All electrical connections are already disconnected. The awning is sloping and stuck in the extended position. Care needed to not damage glass enclosure of nearby pool and pot plants under the awning - Due date: Needs to be done on Monday, 27 November 2023 INSURANCE A MUST TO COVER ANY DAMAGE CAUSED TO THE GLASS POOL ENCLOSURE POOL OR FOR ANY OTHER DAMAGE TO THE HOUSE OR POT PLANTS DESCRIBE THE PROCESS YOU INTEND TO FOLLOW TO DO THE JOB SAFELY How many people will come to complete the task Photos attached already DISPOSAL FEE TO A TIP TO BE INCLUDED IN THE OFFER

Bought the awning from bunnings. After a handyman to assemble and install the fixed arm awning. The old one is damaged and needs to be taken down. I will be able to assist with the lifting and moving of the awnings. - Due date: Before Monday, 13 November 2023

Need help to fix and install outdoor folding arm. it has been wall mounted already. Need to fix folding arm. - Due date: Needs to be done on Friday, 27 October 2023

ITEMS FOR REMEDIAL WORK. The proposed remedial work is concerned mainly with items of surface rust on the exposed steel members as follows:- 1. Rust at isolated points on the roof sheeting. Photo 4. 2.The suspension rods. Refer to Photo 5 3.The perimeter edge channel around the three sides of the awing. Refer to Photos 5 to 7. 4. Rusting section of box gutter. Photo 8. 1. RUST AT ISOLATED POINTS ON THE ROOF SHEETING surface rust on the roof sheeting be removed by light sanding and then apply two coats of cold galvanising paint to the rusted areas of the roof sheeting. 2. THE SUSPENSION RODS. any surface rust be removed by light sanding and then the suspension rods be given two coats of cold galvanising paint. 3. THE PERIMETER CHANNELS. The steel perimeter channel along the front and the two ends of the awning is a structural member that forms part of the awning support structure. Now that signs have been removed the full extent of rusting and fascia damage has been revealed. the exposed channel be cleaned of surface rust and painted with two coats of cold galvanising paint. At the location where the fascia has rusted through, refer Photo 7, this area is to be patched with a galvanised steel plate and the area filled and painted with cold galvanising paint. 4. RUSTING SECTION OF BOX GUTTER. There is one short length of the box gutter where plain steel has been used rather than Colorbond. This length is rusting. Refer Photo 8. the surface rust be removed by light sanding and then apply two coats of cold galvanising paint to the rusted area of the box gutter. - Due date: Flexible

Need quotes for installing outdoor awnings. Prefer if you supply and install or I can buy from online as well. Size 5M * 3M - Due date: Flexible

I would like a steel awning 2.8 m high sloping down to 2.7 m and 4.4 m long X 4.8m wide with 6x posts and guttering installed at South Maroota NSW - Due date: Flexible

i need to install an awning just to cover above my drying rack outdoor. I have this awning https://www.mydeal.com.au/instahut-window-door-awning-door-canopy-outdoor-patio-sun-shield-1-5mx3m-diy-1566421?gclid=CjwKCAjwlJimBhAsEiwA1hrp5lfFSo-5A6qFPaBNQfJPwfCQLGXDONZA70XjhBSrIYFF7DLXdLDd8xoCIw4QAvD_BwE&gclsrc=aw.ds Due date: Flexible

The awning has misaligned itself because of the recent winds and is hitting the wall on one side. There is a cable which is broken in one of the arms. Unable to control the opening and closing with remote, as it gets opened automatically every 2 or 3 minutes. - Due date: Flexible

installation of a 270 Degree Awning to camp trailer

Looking for someone to install a 4x3m folding arm awning in an outdoor pool area. Would like it installed onto the timber fascia board. Will need extra support behind the fascia board and roof rafters with roof rafter brackets (supplied by you) as it is quite heavy. I have already purchased the awning (see link below). The link also contains product specs and installation instructions. May need a second person to lift it on when complete which I’m happy to assist with. https://www.bunnings.com.au/windoware-4-0-x-3-0m-full-cassette-folding-arm-motorised-awning_p1262180?region_id=117096&gbraid=0AAAAADtbEB-3I-3kSJelCFHHM4C4sDrYI&gbraid=0AAAAADtbEB-3I-3kSJelCFHHM4C4sDrYI&gclid=EAIaIQobChMIl86tsLOj_gIViLTtCh2Tbg7LEAQYAyABEgLnOPD_BwE&gclsrc=aw.ds - Due date: Flexible

I wanted to cover the decking area approximately 6m x 1m with a weather proof awning. - Due date: Flexible

Need someone with a strong enough drill to drill through brick at 4 points and help install a plastic awning which is already assembled above the laundry door. I can provide assistance as it requires 2 people. - Due date: Before Monday, 20 March 2023

Need an arm of a Thule Omnistor awning replaced - Due date: Flexible

Flyscreen for awning windows to be installed. I have windows of 3 different size, measurements are not very accurate. 1st window - 1.2 X 0.6 2nd window - 1.2 X 0.9 3rd window - 1.8 X 1 (3 quantity) - Due date: Flexible

planning to buy 2 awnings from bunnings. see pictures attached. description says diy but I don't have tools to do. please give me a quote for the installation of 2 awnings. North kellyville location.

Alfresco outdoor - Awnings installation - Photos attached.