Find a professional gate installation in Scarborough

I have some fairly large gates. Steel frame and Jarrah panels. The pegs that move up and down to keep the gate in place when fully closed or fully open are bent and difficult to use - Due date: Flexible

Looking for someone who can put a lockable gate into our fence line please - Due date: Before Sunday, 5 March 2023

Single swinging gate has a hinge broken and requires new hinge fitted. Best to replace both hinges of the gate. Please attend as soon as Possible. - Due date: Before Saturday, 31 December 2022

The gate to the pool fence has dropped or moved so that it doesn't close properly without it being lifted slightly and pushed. Task is to fix the gate so its compliant and closes automatically

Old gate needs replacing - open to supply and install and happy to have a taller gate/different design/material etc. Gate itself is 900mm w x 1500mm h Total width - 1100mm with posts included either site Based in Scarborough and happy to do the job Friday or next Wednesday. - Due date: Flexible

I have a section of clear plastic corrugated roof sheeting that needs to be secured down as it is flapping in the wind. You will need to supply all fasteners tooling and a method to gain access to the roof to fix down the sheeting. Area of roofing that requires repair is approximately 3m x 2.5m.

Need 5 or so mm shaved off my timber gate as it won’t close properly. Should be a 5 minute job for someone with the right tool/power sander. Sweep up the sawdust when done.

Fixing the gate so it opens fully - Due date: Flexible

Replace hinges on pool gate and limit window opening. The screws on the Hinges are corroded so very hard to get off. I also have to limit 4 wind open windows that needs to be restricted to 100 MM. either using a stopper or wire. - Due date: Flexible

I have 2 hinges on the pool gate that are very hard to get off as the salt air has corroded them. I need them replaced. I also have 4 windows that wind out that need to be limited to 100 MM max. either with a stopper or wire. you can come anyday from today. - Due date: Before Friday, 11 March 2022

Paint corrugated fibre cement fence 40m x approx 1.5m high in Dulux "Green Result". Must be completed by end of 15 February. - Due date: Before Tuesday, 15th Feb 2022

I would like to have an aluminium fence installed, with a gate, at the front of my unit to enclose the front garden. - Due date: Before Tuesday, 30th Nov 2021

Provide an electric sliding gate to match colour of exisiting gate. Fit.

Investigate what is causing problem to central locking system OJ a Hyundai iMax I'm electronic engineer and I'm going to be there to help. Cheers

Side gate required for a new house build (Right hand side of house) Between house and fence is 1830 wide and rendered fence is 1700 high, so will need a gate component + an infill panel. Gate opening width approx 970mm Aluminium gate height approx 1640mm high Happy with 65mm or 90mm slats (10mm gaps between slats) I’m after aluminium gate, with lock. Horizontal alloy slats Grey (surf mist) colour (or any light grey tone)

Centsys D2 Turbo electric gate motor needs maintenance as not working, and also two new remotes installed.

Our glass pool gate is slamming shut & the ‘soft close’ mechanism is no longer working. It appears that oil has leaked out of the stainless steel floor mounted plate. I understand this is a specialist area, so I’m looking for someone that knows what they’re doing in this area to provide a quote for its repair. Please see photos

I need someone with the right skills and tool to pain the back of the gate and the panel attached to the wall. I would also like the gaps touched up as well please.

Set up gate motor and remote for NET24 N DEA Adjust slow down and speed up setting Motor is set up with power and track Just needs to be programmed and striker plate added