Find a professional gate installation in Broadway Nedlands

Pool gate opening/closing mechanism at the base of the gate needs replacing.

Digital ikon pushbutton lock to a colourbond gate. - Due date: Flexible

Two of our pool gates aren’t self closing and it appears that their hinges have been installed upside down (which makes it difficult to adjust the closing tension). I need someone to reinstall the hinges correctly and tighten so that the automatic self closing function is effective. It shouldn’t require any new materials as the existing hinges are fine (just installed ipside down) and I have a spare hinge that has been unused). There may be a need to drill new holes in the gate if the existing holes don’t align with the new hinge settings. - Due date: Before Friday, 12 January 2024

Gate does not close properly, had handyman try and fix before but they could not really fix it, improved it for short time only. Not sure what the problem is ? Hinge issue Would be good if you could tell me you know what was wrong and had fixed this type of issue before rather than just "I'll have a go" type approach. - Due date: Before Friday, 12 January 2024

Replace an existing sliding gate motor - Due date: Flexible

Two pool gates that need their spring fixed - Due date: Before Wednesday, 6 December 2023

To fix a self closing gate that isn’t self closing - Due date: Before Tuesday, 24 October 2023

We have 2-3 timber gates which need repairing or we might need them to be made new. They have come off their hinges. We are looking for handyman / builder experience - Due date: Before Friday, 22 September 2023

I have a few pool gates that need adjusting and fixing - glass and wooden. The do not shut automatically, and one of the gates locks is broken. - Due date: Before Monday, 25 September 2023

It's a corner property needing - i) Fence on the side road - 1.8m high as it is a busy road. Length 20m. ii) Fence on the front road - 1.5m high picket fence. Length 27m. Length includes the driveway gate and pedestrian gate. The width of the gates is 3m (driveway) and 1m (pedestrian). All gates will need to be of the swing type.

We have an electric gate controlled by remote devices however the motor is old and ceased to operate. We need a new motor supplied and installed on the current runners. We also need 3 remotes programmed to run the gate. - Due date: Before Saturday, 30 September 2023

Need the current gate lock changed out for another one I already have. Will need to disconnect the current wires into the existing lock and reconnect them into the new lock (electrically powered lock). - Due date: Flexible

The bottom of this gate is on a diagonal, and we need it square. - Due date: Flexible

The electrical remote controlled residential access sliding gate to our house does not slide or retract and seems stuck. Need an electrician or someone familiar with electric remote controlled sliding residential gates to come take a look to identify what the problem may be and fix it. - Due date: Before Wednesday, 12 April 2023

weld small metal plate to metal gate support - Due date: Needs to be done on Saturday, 18 February 2023

The gate doesn’t seem to want to open and whilst a slight buzz from the motor can be heard there is no engagement - Due date: Before Thursday, 16 February 2023

Two manual sliding gates 2.5m and 5m wide - Due date: Before Sunday, 23 October 2022

- Two panels are required to be welded back onto an entry gate. - The panels look to be stainless steel. As such, stainless steel welds required. - One panel requires welds at two cross brace locations. - One panel requires welds that abut backing panel. - Due date: Flexible

Install retractable baby gate to bottom of stairs. Contains 2 sets of mounting brackets. - Due date: Flexible

Weld / repair small gate. - Due date: Before Sunday, 26 June 2022