Find a local timber flooring profesional in Sutherland Shire

I have one room (20 sqm approx) that I need to do light sanding and polishing. Engineered timber floor boards

Installation of an infill of hybrid timber flooring to kitchen area. The area will require supply and install of levelling compound, however boards for installation are supplied. The area is approx 120mm wide x 2.5m. - Due date: Before Saturday 10th February 2024

Replace tiber floor in small laundry in an apartment 140*150 I have timber flooring Existing flooring was water damaged

I have a 9sqm(3x3) bedroom, that has uneven flooring. The middle of the floor seems to be higher than the two sides. I need to level the floor so that I can lay carpet. Please only offer if you have experience in levelling and advise what material you will use. I will pay for materials. - Due date: Flexible

Timber floors laid in 2 small bedrooms and small area in between in a small 2 bedroom villa - Due date: Before Saturday, 17 June 2023

Timber flooring to be removed and disposed. It is 130m2 and 3 steps. All care to be taken not to damage any walls or joinery. - Due date: Needs to be done on Wednesday, 14 June 2023

Replace the internal timber balustrade at first floor level as its only 860mm in lieu of the required 1m such that it is at least 1m above Finished floor level which appears to be a brown coloured laminate/ vinyl type floor finish. It was noted the vertical timber balusters were 65mm apart. The balustrade is to comply with the provisions of BCA 2019, including amendt 1 part D2.16. Alternatively rectify the existing balustrade to comply with said requirements such that it is at least 1m high above finished floor level. - Due date: Before Monday, 27 March 2023

Installation of engineered timber flooring (tongue and groove) in a town house: - Down stairs: open living and dining/kitchen 48m2 - Stairs: x15 and x1 triangular - Upstairs: hallway and 3x bed rooms 53m2 - Skirting No removal of existing required. Down stairs on concrete slab, may require levelling. Stair and upstairs on timber slab - Due date: Needs to be done on Tuesday, 25 October 2022

Hi, I wanted to know the quote to replace 2 square meters of timber floor. How much is it? Basically, the works are - Remove old timber - Clean the area & mould prevention - Apply a new timber which has the same color as the previous one. Thank you! - Due date: Flexible

We need someone to take timber out from underneath the house and also remove some woodchips from a garden bed around the house - both to reduce risk of pests. Let me know if you can help. I have put $50 in budget but im not sure how much work is involved so will take a reasonable offer. A - Due date: Before Friday, 24th Dec 2021

I am after sealing and sanding timber floorboards that I have recently pulled up carpet from. The size of the job is aprox. 3 bedrooms 1 hallway 1 living area - Due date: Flexible

Hi I need someone to help with installing timber laminate flooring in my basement storage. Area approx 10 sqm. See attached photos. I can supply the tiles.

I don't need sand and polish. Just need some light scratches removed by buffing

I need an experienced floor sander to come on site and see if the existing floorboards have any remaining life left and if the floor could be sanded and refinished. I’m not sure if and how many times the previous owners have sanded it before. This task is for project scoping only.

Have removed tiles and most of the glue but there is more and need more hands to remove the rest.

Hi there, We have a cracked timber floor board that has split, we need it replaced please.

Looking for sanding and polishing with 2 Coates of vanish of timber floors to single area as per photos to approx 60 m2. Also hoping to have four areas of timber supplied and inserted (possible Jarrah) in location of existing floor vents before sanding started

Remove approx 40 sq metres of faulty IKEA timber floor tiles and replace with new. Tiles are 300mm square and clip together. Remove & dispose of faulty tiles. Job involves removing and reinstating pebble edging.

1) Remove existing Timber Floating Floor Boards & underlay 2) Level the concrete floor with leveller (ardent) 3) Relay underlay and Timber floor Boards 4) We can pay seperately for any sanding required but as veneer is 3.5mm the sanding cannot exceed more than 2mm-2.5mm maximum 5) Clear finishon the oak boards