Find experienced local fencing contractors in Sutherland

Need rust repaired and new panels welded into place. Must be a good job

Hi Ian, You commented on my task previously and wanted to see if you might be interested in doing it. You mentioned using a colourbond frame to attach to the fence which sounds ideal. I want 7x wooden lattice screens installed across a 4.2m section onto our colourbond fence. It will cover the length of the paved area in the photo. I have the 7 screens already. They are 2400mm high x 600mm wide. If you need other materials to be used let me know and I can reimburse you on the day or we can go pick them up.  Link to screens below. https://www.bunnings.com.au/lattice-makers-2400-x-600mm-mahogany-oriental-lattice_p0369503 - Due date: Before Friday, 19 January 2024

I want 7x wooden lattice screens installed across a 4.2m section onto our colourbond fence. It will cover the length of the paved area in the photo. I will supply the screens. They are 2400mm x 600mm each. If you need other materials to be used let me know and I can pick them up or reimburse you on the day. Link to screens below. https://www.bunnings.com.au/lattice-makers-2400-x-600mm-mahogany-oriental-lattice_p0369503 Flexible on timing - Due date: Flexible

We need 4 x fence posts re-set as have become loose Would like to get colourbond fence extensions installed to screen out neighbours. Refer photos Side fence 300mm - 450mm extensions 5 x 2400mm 1 x 700mm Back fence 600mm extensions 1 x 2200mm 1 x 3100mm 1 x 2400mm 1 x 2600mm 1 x 2400mm Back right corner 300mm - 450mm extensions 1 x 850mm 1 x 1200mm - Due date: Flexible

Hi guys I purchased a poolfence as per photo 17m Will go into ground on turf area Not on concrete After a exp person to install

Have the materials. Need a gate built for side of house - Due date: Before Sunday, 9 October 2022

Need someone to supply and install bamboo root barrier 50cm deep 10m long

Hi guys Need a pool fence installer on a concrete floor 17m intotal 1x gate Ill supply all materials

Supple and replace damaged piece of fencing.

Supply and instal a fence with a entry gate. Roughly a 7 metre run. Fence has to be similar to the one in the first picture. The fence will run from the house over to the colourbond fence.

I have an existing Colourbond fence frame and posts but the infill sheets are lattice, which provide no privacy. I would like to replace the lattice for colourbond infill sheets, so I don’t see my neighbours. One fence is next to the main entrance door The other fence is the one between me and the neighbour In total 2 fences Colour I believe is Monument Grey Location: Sutherland 6 panels 2380 x 1500 1 panel 1700 x 1500

Five minute job need a world on a colour bond fence.

Bring the green fence panels to the height of the black barrier. Approx 2.4m wide (3 panels) and 2.4m at highest point. The bottom of the panels is at an angle and will need to be cut. The posts extended and finished with a rail/edging.

About 20 metres of pickets and posts of old timber fence+ few bamboo trees