Find experienced local fencing contractors in North Sydney

Need help installing gates on brick fence. Fence panels will be aluminium fence panels and attachment equipment. Including 2 x swing gate opening kits. Need tools and also may need to cut the panels to size.

Demo of existing single brick wall, about 6m in length, removal and disposal of bricks. Removal and disposal of existing 4m in length of paling fence. Build a new 25 meters long treated timber paling fence, 1.8m high. The fence sits on the boundary of two free standing houses. For the length of 6m, where the brick wall was, the timber fence must be double paling. Where the brick wall exists there is a deck on one side and bare land on the other. The deck must not be damaged and there is a 1 brick that sticks out in the deck and that must be made good (no holes in the deck when the brick is replaced with timber fence) The starts at normal height of 1.8m but tapers down to 1m height at about 3m from where it meets the footpath at the front of the house. Also need about 4m of treated timber retaining wall to sit under a part of the fence, the retaining wall is retaining about 500mm. You must have public liability insurance and workers comp insurance.

Need a 16 meters long treated timber paling fence, 1.8m high. The fence sits on the boundary of two free standing houses. The starts at normal height of 1.8m but tapers down to 1m height at about 3m from where it meets the footpath at the front of the house. Also need about 4m of treated timber retaining wall to sit under a part of the fence, the retaining wall is retaining about 500mm. You must have public liability insurance and ideally workers comp insurance.

Need a febce maker at the fromt my house, frontage is 23 meter and it is in Mount Colah.If anyone interested please send me a quote and- d contact details

Hi, I need an experienced handyperson to do the following tasks. 1. Remove an old post from the pool fencing. 2. Bolt down the new steel post to brick/concrete floor and attach it to the fence rails. I'll supply the steel post as in the picture. You would supply the rest, brackets, dynabolts, etc. Thanks!

Hello, I’m looking for someone to install some Rapid Fence panels from Bunnings. We will need: - 2 x (1200x2200) panels with one post in the middle on the right hand side of the bush in the photo - 1 x gate for area measuring 1.25m on the left hand side of the bush in the photo Ready to hire. Job in North Sydney. Please quote Thank you Jade

Colorbond fence, length about 30m, height 1.8m. color: Basalt. Two 1m gated needed. Accept fixed-price and all inclusive quote only, no variations please. Email & mobile texts only. Thanks

Attach a piece of hessian (w2400mm x h900mm) to the fence to comply with council's pool barrier direction. It's just a small area, use wire or fish line to tie the hessian onto the fence, has to be done professionally. Hessian and wire will be provided, but you may bring your tools to finish the work.

Install 30 ms of 1.8 high lapped treated pine paling fence I will supply materials and take old fence away. Must be experienced. I need this done on a certain day . If I can’t get a fencer I will need labourer to dig post holes and will need materials placed along boundary

Some fencing panels are leaning in. Needs them repaired.

3. Sliding gate & security pedestrian gate install for driveway - I have an existing front boundary brick wall that is approx 1.8m high either side. 1. I wish to install a sliding driveway gate. Length of the gate is 4.81m. I will need the LHS wall rebuilt/rendered + a brick pylon and support post installed for the gate. 2. Install a 0.9m security pedestrian gate next to the sliding driveway gate. **Happy to take quotes for components of the project** See enclosed pictures with mock-up concepts + the style of gates we’re after.

I have a pool report, and main job is doing 10 meter fence, and increase 15 meters fence height, short some small bush to meet the pool safety requirement total budget is 2500. budget including inspection and certificate fee. I will pay 200 as deposit, and pay the rest when I pass the pool check and get the certificate

Need this brick fence knocked down Approx 14 metres in length, Then either you can knock it into pieces small enough to be able to be carried by 2 man or can drag it onto the front yard with some sort of lifting device if you have just demolition no disposal needed

We require a 6.1 metre concrete stip to be laid to enable a glass pool fence to be fitted. Our pool fence man has advised it needs to be 200mm in width & 300 mm in depth and a 10ml bar has to fit on each side We request that the successful bidder discuss with pool fence guy for accurate instructions Supply of concrete required

Hi there I have 2 little dogs and one keeps escaping . I need someone to check the back fence perimeter for any holes they have dug and seal up with bricks please .the fence is behind the big hedges . It’s not a huge job and we have checked many times but she keeps getting out . We are in Greenwich. - Due date: Needs to be done on Friday, 5 January 2024

You will be helping my fencing contractors with demo of old fence and also the build of fence. also looking for workers over the christmas period, having a ute would be a plus. - Due date: Needs to be done on Friday, 8 December 2023

Quote to install 6-7m glass pool fence incorporating gate and glass to boundary fence 400mm from rockery wall. - Due date: Flexible

I need a pedestrian gate installed, there is an existing colourbind post (photo attached) that the new gate is to be attached to.

We would like to replace the back fence of our backyard. About 6 metres long. - Due date: Flexible

We need to replace three glass panels on our pool fence and attach the glass to new pergola posts. The fixings/glazing posts need to match the existing ones elsewhere on the fence. We also need to replace the hinges on one gate. We need the parts sourced and installed. You will need to do a proper measurement but the glass is about 1160mm high by 1045mm, 1050mm and 1065mm wide. The existing glazing posts are 25mm x 25mm but there is a wider one on one gate so 50mm x 50 mm would be acceptable too. Picture of the gaps, current posts and hinges are provided. We are flexible on installation times but any noisy activity needs to avoid our toddler’s nap time (12.30-3pm). Thanks - Due date: Flexible