Find experienced local fencing contractors in Palmwoods

We need a mobile welder to assist us with alterations to three gates. Gate 1 needs a steel frame extension as the current Fran is too short compared to the fence on either side. Gate 2 needs the latch moved from the top to the middle where the other part of the latch is on the fence. Gate 3 is a double driveway gate and the two latch components switched to the opposite side. We need all tools and materials supplied.

Repair to existing fencing and modify current arrangement to include additional gates - 210m of fencing in place currently - Due date: Flexible

The wooden side access gate post has fallen away from the concrete sleepers it was attached to, causing the gate to drop and no longer latch. Need the post re-secured to the concrete sleeper and the gate aligned with the latch. - Due date: Flexible

I would like double gates and adjoining fence put up. Total length of gap is 8.15metres. I can buy the materials, unless you can offer to supply these as an extra and I’ll reimburse you. - Due date: Flexible

Measure up area for gates, purchase materials and install. - Due date: Flexible

13m long 1.8m high timber fence has one of the seven posts rotted out. The others seem fine, but some of the rails are bent accordingly. - Due date: Flexible

Approx. 10 metres of wooden paling boundary fence to be increased in height and made splash proof. Approx. 6 metres of pool fence needs in-fills below bottom rails. - Due date: Before Monday, 31 October 2022

Two separate jobs: Job 1: I am need a fence erected with a double gate (supplied) in our courtyard. Total width 11.3metres. We will supply the two white gates which are each 2.36m wide (total) 4.72m. We will supply a single predestrian gate 900mm wide. So total fencing is 11.3m (less 4.72m less 0.9m), total fencing about 5.7m. You supply and install posts and fence panels. Job 2: I need a fence erected 8.07m wide with a double gate (supplied). We have two gates 1.44m each (total 2.88m). Total fencing is 8.07m less 2.88m = 5.2m

Supply fixings, tools and labour to connect x3 fence palings to steel posts and x1 fence paling to horizontal timber rail.

replace broken steel posts with hardwood timber posts - Due date: Flexible

fence repairs to exisitng wooden fence. Some rotten sleeper panels at base. Fence leaning slightly - Due date: Flexible

Looking for a quote on a timber fence in new development in palmwoods. Overlapping palings and top plate.

I need approx 8 meters of Avery wire/mesh installed to 2 areas around pool

We have a treated pine fence that needs to be re-nailed/secured in places. 90% of the fence is fine but I want it to all be re-shot so we can clean it and paint it. Approx 45mtrs