Find a local glass fencing contractor in NSW

Pool gate will no longer self close need it fixed it is a glass gate

Supply and install aluminium fence

Needing pool fence supplied and installed White alliminium

Hello, I’m looking for someone to install some Rapid Fence panels from Bunnings. We will need: - 2 x (1200x2200) panels with one post in the middle on the right hand side of the bush in the photo - 1 x gate for area measuring 1.25m on the left hand side of the bush in the photo Ready to hire. Job in North Sydney. Please quote Thank you Jade

Attach a piece of hessian (w2400mm x h900mm) to the fence to comply with council's pool barrier direction. It's just a small area, use wire or fish line to tie the hessian onto the fence, has to be done professionally. Hessian and wire will be provided, but you may bring your tools to finish the work.

I am reinstalling a pool fence - 23 new steel posts need fixing to a concrete slab and then the existing 2 gates and approx 25 existing panels to be attached to the posts.

The fence needs to connect drill

13.6m glass frameless fence

Aluminium pool fencing installation and certification

Pool fencing aluminium and certification

We require a 6.1 metre concrete stip to be laid to enable a glass pool fence to be fitted. Our pool fence man has advised it needs to be 200mm in width & 300 mm in depth and a 10ml bar has to fit on each side We request that the successful bidder discuss with pool fence guy for accurate instructions Supply of concrete required

Install 4 metres of aluminium pool fencing into concrete floor. We have the fencing and gate. You will need to bring the tools to drill into concrete.

We need our pool fence flipped over so the horizontal bar is at the bottom not the top, this has been mandated by Blacktown Council. Please see pictures. We have 7 panels to flip around, I also need the gate adjusted to auto close from any position.

Need few changes done to the fence to get it upto the compliance

The gate for the pool fence is not aligned so doesn’t shut anymore. I just need it fixed so the gate can open and shut properly - Due date: Flexible

Put up 1 panel pool fence and gate can be bolted into pavers and fixed to pailing fence the gate can be fixed to existing fence post panel not quite long enough happy for wood to be added on pailing side to make fit….its only to lock dogs up when needed I also have a shade cloth that needs to be put up and then 2 semi permanent pergolas to be erected which can be quoted for when u come - Due date: Needs to be done on Friday, 8 December 2023

A small section of pool fence is non compliant (currently 1.2M, but needs to be 1.8M due to nearby hedge within the 90cm radius). Need to remove and replace with same/similar section that is 1.8M. - Due date: Flexible

Quote to install 6-7m glass pool fence incorporating gate and glass to boundary fence 400mm from rockery wall. - Due date: Flexible

We need to replace three glass panels on our pool fence and attach the glass to new pergola posts. The fixings/glazing posts need to match the existing ones elsewhere on the fence. We also need to replace the hinges on one gate. We need the parts sourced and installed. You will need to do a proper measurement but the glass is about 1160mm high by 1045mm, 1050mm and 1065mm wide. The existing glazing posts are 25mm x 25mm but there is a wider one on one gate so 50mm x 50 mm would be acceptable too. Picture of the gaps, current posts and hinges are provided. We are flexible on installation times but any noisy activity needs to avoid our toddler’s nap time (12.30-3pm). Thanks - Due date: Flexible

I have a swimming pool that we converted into a pond several years ago. I want to lease the house & have found out that the pool fence is non-compliant. The house cannot be leased until the pool fence is made compliant. The main task I need done are two(2) new additional fences to be installed. One fence is approx 6m in length; the other around 12m. Vegetation around the pool has already been cleared for easy access. A non-compliance report can be provided to the successful AirTasker for full details. I prefer to supply the necessary materials but am open to discussing other options. - Due date: Needs to be done sometime in the week beginning 23 October 2023.