Find a fence installation professional in North West Melbourne

Seeking a skilled handyman to fix/replace leaning front gate with steel frame and repair cracked merbau panels.

Hello, I am hoping someone might help us pull down a wobbly brick wall and build a new wooden fence and gate. We would also ask that all rubbish be removed from property :)

Hi looking for someone to supply and install black vertical panel fencing see photos for reference, Want something good quality not something that will rust, Sizes are Sliding gate 5.8m wide x 1.2m high Pedestrian gate 1m wide x 1.2m high Then the remaining fence 5.5m wide x 1.2m high Thanks

Fence to be replaced Approx 20m and needs to be 2m high Old fence to be removed and disposed of Just after quotes atm as need to talk to neighbours as well

I’m after a side gate with a merbau look. Using pre made timber panels. Add posts to support them but one will be a gate and one will be a fixed panel due to the size. No material/tools supplied. Dimensions to neighbours house is 1640mm, need heigh to be roughly 1800mm. Any other questions, please let me know.

Need help in installing a Bunnings 3.3m aluminum fence

replacement of very old fence, approximately 43 meters in length, on a slope block, sloping upwards to back fence. Colour bond or timber, depending on price.

Fence installed on the out

I would like a partial fence replacement of 5.3M length

Replace timber posts of carport

Work to be done: 1. Remove the existing fence 2. Supply new timber fence (keep in mind the front part is a different design, supply both designs) 3. Install new timber fence 4. Dispose of old timber fence You may need to come out to size and measure please let me know, however, end to end, it's about 20m-22m long. If you need accurate measurements of height/length, let me know too. If you look at the pics, the front part is a smaller-sized fence maybe 6m worth and then extends to full size for the rest of the way. If you need accurate measurements, let me know if you won't be able to come out to measure.

Need a new colourbond fence and gate installed. 1.8m high. Roughly 12 metres and 1.1 meter gate. I will remove and dispose of the existing fence myself.

Install a chain mesh fence across the front and side of factory. Along with 2 gates. Total fence is 23m including 2x gates at 4.5m each.

Hi, I am after two side gates for a new build. Supplied and fitted. Location - Pascoe Vale 3044 Style: Colourbond Vertical Slats Height: 1800 Colour - Monument Side 1: Total Width 1500 500 fixed piece + 1000 Gate Side 2: Total width 1200 1200 Gate Please let me know the cost for supply and installation. Thank you Chad

Dismantle and build a new paling fence 8m x 1.9m high

Need timber fence replaced with new timber fence approx 3.8mt x 1.8mt fence

Needing a colour bond fence installed. 20-25metres worth. And removal of old timber fence

Hi there, I need some posts and netting fixed to my fence to stop balls going over into the neighbours yard. Ideally completed on Sunday 10th please. I have purchased the products needed. It will be installed onto a wooden fence.

I need a gate supplied and installed in a driveway, I have attached a photo for reference. Driveway is standard size. I would like something similar to the photo I attached. - Due date: Flexible

Glass pull fence company - supply and install.