Find a fence installation professional in Mornington Peninsula

Need the current side gates replaced with easy to access gates with key locks at an easy height. One gate is 2700 wide x 1900 high, but would like to replaced with 2700 x 2100 high. The other gate is 1200 wide x 1900 high, but would like to replace with 1200 wide by 2100 high. Looking for metal solutions that do not need much maintenance and will not rust. Also want the gates to block wind (especially the larger gate), so must not be able to see through.

Require removal of old timber fencer, and to be replaced with 45 metre long straight line stepped colorbond fence, sheets colour meadow, posts and rails black, with 30 200x50 H4 timber plinths under to add height. There is a already completed fence on the other side of the yard for reference.

build wall and fence / screen

Looking for 2 options. fence repair or install. Repair the current fence if possible or Supply & install Standard timber paling fence to right side boundary between 16 & 14 East Rd, full length of property, using Hardwood posts with treated pine frame & palings. Height * length -1.95 * 71m

One 6 foot post holding up front fence. Side fence leaning? Needs more support.

Existing driveway gate post rotten and fallen on ground. Need it reinstalled and half the gate put on it. Then both realigned Or New driveway gate. Basic design fine.

Seeking quote to replace wood fence palings with aluminium for front fence, 3 X gates - one small, one driveway from street and one higher gate 10 meters from the street. Dependant on price may also seek automation of street gate which is currently on rails but not automated. Note have put $5 as budget but really have no idea of price thus seeking quotes.

Install fence toppers to driveway fence approx 20 metres. Also paint with supplied paint

Timber paling fence replaced, approx 20m in length

We have demolished a house and are building a new house. 2 of the old fences need to be removed and new fences built. The 3rd timber paling fence on the South side needs some repair and extension. North side fence to be removed is a cyclone wire fence approx 37m long. It has treated pine posts. It needs to be replaced with a new timber paling fence (lapped and capped) with a minimum height of 1.8m (to meet building permit requirements) and 38m long. Pictures included. Back fence (West side) is 16.8m long. Old fence to be removed is steel reo with a double gate for car access. We have street access at back too. Building permit specifies new timber paling fence min 1.8m height. We want a new fence with vertical timber slats with a double gate to allow car/caravan/boat access. Pictures of existing fence attached. Example of new fence we have in mind is in this link https://latticefactory.com.au/premium-hardwood-batten-screens/vertical-hardwood-batten-screens-standard-size/ Existing South side timber paling fence was in good order before building commenced. This just needs to be repaired and extended so that min height is 1.8m to pass final inspection. Pictures attached. Soil is sand so fence posts for new fences will need to be deep enough and concreted in. Please quote separately for each fence so that I can present quotes to relevant neighbours.

Past or full fence replacement

Install temp fencing to keep people from camping out

Need a basic gate at the front of my house in driveway. The width of the driveway is roughly 360cm, the height I'd like it to be is roughly 180cm I have a white timber fence so would need to somewhat match

2 metal gates 1800 high and 1.2 wide total. 2 steel uprights I. One attatched to a wooden post the other on a bracket into concrete on a bracket

New back fence, need new posts and railings House is divided with 2 properties on the other side.

Replace front fence with picket fence approx 1.4 height add sliding gate located Frankston south approx 20 metres including gate - Due date: Flexible

Hi all, Looking to find someone able to replace and paint one piece of painted timber paling connection on my veranda which is starting to rot. Length of piece is approx. 1.6mt. Please quote to include matching colour and paint. Thanks

2.5 meters off ground Approx 17 meters long 3 meters wide Merbau 70mm

Looking for someone to replace old farm fencing (32 posts) and 2 gate posts. We have been told 1 to 2 days work for someone with the right machinery (I will provide myself as laborer for the day, wouldn’t mind learning how it’s done) - Due date: Flexible - Due date: Flexible

Hi, i have an external picket fence, which requires approx 4fence posts replacing. Posts will be supplied - Due date: Flexible