Find a fence installation professional in Marrickville

Scope as below: -Supply and install new Colorbond fencing on side(10m)and the back(3m) -Supply and install a new Colorbond sliding gate(non-automated) (3m) -Demo,remove and dump existing timber fence at the back(only) Colorbond fence and gate must be standard sheet, 2.1m high, Shale Grey color Posts will be grouted at side and bolted to kerb at thr back Tree stump will be removed before this work starts - Due date: Before Sunday, 21 January 2024

Our colourbond lattice fence needs a gate installed. A post will need to be drilled into the tile of the patio. Please advise if a gate needs to be purchased of if one can be made from the existing fencing. - Due date: Flexible

We have purchased a new side gate, and need it installed. Posts are existing in the spot, but need to be removed and replaced (to the appropriate width to make the new gate fit) as they’re rotting. Must supply, posts, hinges, latch, and all tools needed to get the job done. I will stain and oil gate and posts. Gate hole (from wall to fence) is 1180cm width. New gate is 90cm width. Old gate was 1m width fyi. - Due date: Flexible

Existing fence, cut in x2 to form x2 gates nom.1200mm wide x 900mm high. Add hinges and centre locking mechanism and reinstall. - Due date: Flexible

We need a wooden slat fence installed to sit in front of an existing colorbond fence - there is currently a bamboo screen that needs to be removed (it's tied on. Photo 1 is our fence on the other side - this is what we're wanting with a 0.5cm gap in-between the slats. Details are: - Treated slats, but not stained - Dimensions (approx) 10m in length - We need a bit of space in-between planks - approx 0.5cm - There will be two heights of screening: * 1st section 2.1 high from ground (this section will sit in a garden bed - see photos - so you will need to allow for longer timber to anchor to bottom of bed, approx 0.6m) * 2nd section 2.1M high, to sit on a level concrete path Please quote for all materials and installation. Thank you. - Due date: Before Thursday, 29 September 2022

Replace an existing wooden overlayed slat garden fence - approx 44 metres long.

To install a picket fence and gate in the inner west

Replace front corner block fence with tubular steel.

Need continuity of the fence which I already have (check picture) and design, supply and install the gate. 2.55 meter wide and 1.1 meter high Most probably paint t with matching color as well (but not compulsory) as we have painter with us as well. Please indicate what service your quote includes.

I have a timber fence in the backyard to be replaced. The fence is a dividing side fence with my neighbour and the details are - New fence material is to be treated pine with steel posts Fence to be 1.8m high and 24.5m long Old fence to be demolished and removed Boundary line to be cleared of vegetation (survey work has been done and marked out). Looking for quotes and am happy to meet onsite.

we need a 3 meter monument gate supplied and installed.

There is an old worn down fence between my house and my neighbours. I would like it replaced with timber or colorbond.

Seeking quotes from experienced and licensed fencer with ABN and insurance. Supply and install timber 2 rail paling fence and gates: 1. Front fence: 4m x 1.2m high fence 2. Front single gate 1m (including posts) x 1.2m, with latch (no lock), hinges on left, opening inwards 3. Right fence: 3.8m x 1.2m high 4. Left side fence: 28m x 1.8m high 5. Left side double gate (for offstreet parking): 2.7m wide x 1.8m high, opening outwards, handles on outside, bolt on inside Remove and dispose of old timber fence (33 m)

Need a quote to replace 3.5m treated pine fencing

We have purchase vertical slatted screens which come as a panel (2m high and 900 wide) we need panels fixed onto back boundary fence and side boundary fence. Back boundary is colourbond Side boundary is timber There are approx 17 panels to be fixed onto the fence.

1. Installation of approx 16m (two sides so 32m) of fence screening to extend a new fence on both sides. Pre built screens are fine but gap between any Slates must be less than 10cm as there is a pool on one side. On the picture you can see this is on the two sides right and left. 2. Contraction and installation of a 8m x 2.8m (high) screen to attach to a Colorbond fence (site in front of fence). Can be made of hard type wood or could be pre manufactured. On the photo this is to screen the fence at the back and hide the ugly shed. Can sit in front of colour bond fence and attached to it.

basic replacement fence between two properties at the back of the house of about 8 mts length and standard 1.8 mts height this job needs to be quoted on before installation so a fixed price is decided upon between the 2 parties

Need to replace our side fence with basic paling fence. It is 40m long Need to demolish and remove current fence.

I have an exisiting metal fence (can use exisiting poles in cement) to be replaced with a modern wooden fence. The new fence will be front border only, 2.6m wide by 1.2m high. It can be painted by you or by us.

One side of my fence is fallen down old wood and want to replace it with green colourbond and instal a door / gate in the backyard