Find a local colorbond fencing contractor in Glen Waverley

Remove old timber fence at rear and replace with approx 16m long new colourbond fence min height 1.8m from ground level. Have a single garage for access.

Replace ex brick fence with colourbond fence approx 11m long 1.8 high. Great access and in front yard.

Supply and install colorbond cream colour gate with red manor frame. Gate size 800mm wide x 1800mm tall. Colorbond has zig zag profile. Gate installed to 2 x 50mm post which are burried 200mm deep and also attached to brick walls on both side. I will supply hinges and lock and also will dug up the hole ready for concreeting. - Due date: Before Sunday, 31st Oct 2021

Need a fence put up to close off the back of the carport. 1.8m height, 5.33m length. Small single gate for person access in and out of the carport. Slatted timber/ Colourbond

size is around 1.*3m please provide quote for labor only and labor plus material

I need two timber side gates removed and two colourbond gates installed. I would like the the new gates to have locking capability

We need a 2m high fence on a steep block lowest section may need to be 3m and we would like the post to be able to support additional 600mm Fence extensions which need to be an optional part of the installation.

Looking to build a colorbond fence 26 m x 1.8 m

A 18 meter slab fence 1.5 meter in height with a lockable gate-and a 8 meter colorbond fence 1.8 meter in height to be erected in the front garden to enhance appearance and security