Find experienced local fencing contractors in Broadway Nedlands

We have a opening in our fence which need to be fenced. It is circa 2m wide and 1.8m high. We would like a timber lap wood panel that can be screwed into the support posts so that it is semi permanent. We need a carpenter with their own tools and experience to do this job it should be a day or so of work. The carpenter should source the timber for the job.

General timber fence repairs replace eight timber boards

Pool gate opening/closing mechanism at the base of the gate needs replacing.

My picket fence is leaning to one side because two posts are coming off the ground, possibly because the bottom of the post has rotted (no termites though). Need this fixed. - Due date: Flexible

It's a corner property needing - i) Fence on the side road - 1.8m high as it is a busy road. Length 20m. ii) Fence on the front road - 1.5m high picket fence. Length 27m. Length includes the driveway gate and pedestrian gate. The width of the gates is 3m (driveway) and 1m (pedestrian). All gates will need to be of the swing type.

We have a small picket fence. And two support posts are coming off the ground. Need someone to fix that. Should be an easy and quick job. - Due date: Flexible

Existing timber picket fence needs removal taking away and new pine lap fence installed to match newer fence section . About Two thirds of rear boundary around 10 to 12 m - Due date: Flexible

We are having a very large tree on boundary fence removed. Will require existing timber paling fence to be removed around base of tree to allow tree loppers access, then reinstatement of new matching pine lap fence. Approximately 10m on new fence will be required. Looking for quote including all materials and labour and rubbish removal Due date: Flexible

Looking to get a pine timber picket fence installed in between limestone pillars. 6m linear length in total. I can provide pickets, rails and screws. I just need an experienced carpenter to knock them up accurately and quickly. Rails need to be angled to comply with pool fence regs (image attached for reference) I’ve attached a drawing for reference. - Due date: Before Monday, 7 November 2022

Have grown a creeper on a fence with three brick colours. The creeper is going well so I want to give fence some more support. - Due date: Flexible

Hi I need someone to install some Brushwood fencing Some will need to be cut to size Cheers Robina - Due date: Flexible

Repair of boundary fence - looking for quotes at this stage. - Due date: Flexible

Remove metal garden edging. Dig in railway sleepers to 8 metres of garden, along the driveway. Possibly 1, maximum two sleepers high. Dig and cement in supporting posts for the sleepers. Bolt the posts to the sleepers. Attach posts to 1.8 x 0.9 fence panels and dig and cement into the ground behind the sleepers. See photos - small wooden posts, large wooden posts and metal posts will need to be used. May need to be cut to size. You’ll need the tools for that. Cement and bolts will be included. To be done preferably this or next weekend.

Latch on glass pool fence broken will not close needs adjustment. Possibly new latch .

Remove 6 metre long cream colourbond fence and replace with monument colour. Fencing posts and panels to be reused from fence which was removed from other side of my yard. Building rubbish seen in photos except bricks will be removed. Access by neighbours side may be easier and can be arranged. Price to include the provision of cement and any other tools etc needed other than the posts and the panels.

hello, I would like the wire fence of our chicken coup extended by another metre right around so the chickens can't fly out and poop everywhere. Will pay purchase of materials. - Due date: Flexible

Fabrication and installation of steel gates. Refer to attached.

A branch has fallen from neighbour’s tree and damaged the fence. I need this fixed. I am not sure what is reasonable price please make an offer

Space is 1250mm (house wall to fence). Likely to need a 900mm width gate and a post each side. Height required is 1800mm.

We are looking for around 40m of fencing to be installed. 1.8m high hardwood screen fencing. Any questions please let me know.