Find a professional aluminum fence installer in NSW

Supply and install a White aluminium slatted Fence. Slats 40mm thick with 10mm gap or similar. Section 1 - up against existing metal fence mounted on timber base. 4100mm long x 1700mm high Section 2 - freestanding fence - posts concreted in. 4000mm long x 1450mm high 1 small section on slight angle 1200mm long x1200mm high butting up to a hedge. Separate Option cost to install only the build it yourself pack from Oxworks.

Front aluminium gate fence welding needs repair - Due date: Flexible

Replacement of old wooden fencing front entrancewith aluminum fencing or pther material if recommend. Repair painting for the front fencing and replace broken swimming pool fence - Due date: Flexible

Looking to install a fence for this front yard - Due date: Flexible

Fix the fence for loose panels & general fix - Due date: Flexible

replace old timber fencing and put aluminium - 2 storey home - Due date: Flexible

Our old brush fence and wooden gate need to be removed and disposed of, and replaced by an aluminium fence (prefabricated panels) and gate. The length of fencing involved is 17.5m, and fence height should be 1500mm. Airtasker is asked to do an onsite inspection before quoting if possible. Additionally, suggestions about where to source new fence panels and gate would be appreciated. The budget listed does not include the fence panels and gate. Only experienced fencing contractors must apply please. - Due date: Flexible

We would like to put aluminium fencing around the front of our house including a sliding gate, double entrance gate with lock and then fences ontop of retaining wall. We would love hearts similar to picture shown. Have also uploaded images with red lines indicating where the fences would go. Looking for a price guide and someone to measure - Due date: Flexible

Hi I would like a quotation for aluminium slat fencing. Dimensions as per below. Colour - Black Area - Front yard/patio 1 - Door 1450x93cm 2 - 1135x69cm 3 - 113x69cm 4 - 1530x69cm 5 - 1550x69cm 6 - 1550x69cm 7 - 1530x69cm 8 - 1280x69cm 9 - 1270x69cm 10 - 1260x69 cm Kind regards Sally - Due date: Flexible

Approx 50m of brush fencing to be removed and replaced with 1.8m high aluminium vertical slat fencing in a timber look finish. site is within a childcare centre so there are a few restrictions, but these will be covered by some temporary fencing that i will supply. the job needs to be quoted so i will put $10 in the value section of the form. - Due date: Flexible

Neet a 1500mm high powder-coated aluminium fence installed including posts and some modfications to existing fence - Due date: Flexible

Need to get 2x Aluminium Side Fence Gates assembled. Posts have been installed. Just need to assemble the gates and install. All materials provided. Just need labour and tools. See attached photo. - Due date: Flexible

To erect 7 metre of slate fencing with l.7metre hight on straight level paved ground - Due date: Flexible

* Dismantle fence and motorised sliding gate (electricity will be disconnected from motor) *existing Aluminium fence is 16997mm x 1550mmhigh. Each panel is 1732mm. All parts within panel are welded. Max.length 3464mm. Others are shorter. Panels come apart via screws top and bottom of posts. * Transport fence & gate from Narraweena to Frenchs Forest. (Must be removed after 15 May and before 21 May.) * Can also quote to install fence with additional panel and gate. (New fence will total 19850mm, including 900mm gate) - Due date: Before Sunday, 21 May 2023

Our aluminium fence has had slats fall off, we are after someone who weld (or some other way out them back on) - Due date: Flexible

Pickup 4 x curved pool fence panels from Cherrybrook and deliver to Botany. Panels are 2045mm long x 1200mm wide. Pick up any time from Cherrybrook and delivery to Botany after 2:00pm. - Due date: Needs to be done on Monday, 8 May 2023

I need 2 dents removed from an aluminium fence - Due date: Needs to be done on Wednesday, 8 March 2023

Looking for someone to install knotwood Fencing approx 100sqm. - Due date: Flexible

We’re wanting to replace the existing fencing around our balcony with aluminium fencing. Job would include providing options of fencing, sourcing, removal and disposal of old fencing, installing new fencing. We’re after quotes at the moment to price up the job - no idea about what it’ll cost so have just popped in a minimum. Total metres in fencing currently is: 17 linear metres, fence height is 1metre, would need a gate installed, too. Please let me know if there is more info needed. - Due date: Flexible

Need an aluminium slat fence supplied and installed around the perimeter of our patio area.. photo attached - Due date: Flexible