Find local air source heat pump installation & repair in East Melbourne

Install Bosch series 4 washing machine and heat pump dryer in the laundry room without damaging the property.

I just realized that the temperature adjuster of my heat pump system is not working. Need a plumber come and check.Probably need some replacement.

Hi I have purchased a 35kw 3-phase sensaheat heat pump, and I would like assistance with installation. I am happy to (potentially) reuse the existing solar plumbing, or piggy back of the filter pump. I am located in Canterbury, 3126. Thanks Jonathan - Due date: Flexible

1. New fridge needs to be plumbed. Filter located in side fridge. Needs a hole drilled through wall and the back of the cabinet to access water. 2. New Heat Pump dryer needs to be plumbed. No need to drill holes however water drain has only one point for the washing machine water. 3. Two x shower head water restrictors to be removed if possible. - Due date: Flexible

Installation of a heat pump hot water heater (https://www.hydrothermhotwatersystems.com.au/product/hydrotherm-dynamic/) to be supplied by me, along with pipe insulation to all exposed pipework, at my home in Box Hill North. Must be fully registered and insured, and have experience installing heat pump hot water systems and be comfortable with lifting the tank over the neighbours side of fence, due to tight side clearance (see attached photos - existing shed). Existing external GPO available. - Due date: Flexible - Due date: Flexible - Due date: Flexible - Due date: Flexible

Someone needed to install a new swimming pool heat pump in an appropriate spot down the side of a house or on brackets. The unit needs to be commissioned and made sure it’s working. A gas heater needs to be removed and the heat pump needs to be lifted and moved down the side of the house. The heat pump will weigh 80 kgs. The plumbing requires a 3 way valve and a non return to insure the correct flow can be regulated.

We have a Bosch Heat Pump dryer in a European Laundry. The drainage hose that takes the evaporated water from the dryer is too short to reach the drain. We have connected the drainage hose to the drain outlet using 10mm plastic transparent pipe from bunnings but this pipe keeps getting kinks in it and so doesn't carry the water properly. We need a plumber to install a permanent pipe to make sure this works properly. The dryer is very snuggly fitted into the cupboard cavity and so it requires some manouvering to take it out and put it back in ensuring the pipes and power are all connected properly. This is a two-person job - needing two strong people. So we require a plumbing team of two (plumber + an assistant or apprentice). - Due date: Before Wednesday, 27th Oct 2021

Remove Miele Washer and Dryer in a stacker set ( needs tools to dismantle ) from single story houses - Prahran to Richmond. ONLY quote for this job if your have experience undoing a Miele stacker system. 2 Person Job - Need tools to undo the stacker system that holds the dryer in place on top of washing machine. Washing machine is 100 - 120 kg and Heat Pump dryer is 60 kgs. Washing machine hoses need to be disconnected. Heat pump dryer is very heavy and needs two people to lift if off the stack and onto a dolly. Single story house to house move - needs to be done in afternoon time window.

It’s already where it needs to be so no lifting is required I think. Just installing it , I have no idea how to , just need some help! Thanks ! $110 is fair

Need someone to help stack the dryer on top of washing machine. Preferable someone able to get stacking kits and install them as well. Current washing machine brand is Bosch and newly purchase dryer is Teka. Both pictures attached. Washing machine measurement 595x595 width and depth. Teka dryer 595x622