Find experienced local carpenters in Warriewood

Have you built a Spantec decking product or similar steel framed deck solution? Ours is being manufactired and will be ready for intall first week of October. Please reach out if you have expereince in this area. Dates are flexible but would prefer Tuesday 3/10-Friday 6/10. Final price TBC - please reach out for more info or to discuss. - Due date: Needs to be done on Tuesday, 3 October 2023

Sand, treat and stain spotted gum deck + wooden benches/side panels (est. 70m2). We can provide rental sanding equipment, cleaning + deck oil, as required (please let me know). Open to quotes based on experience, so please note budget flexible on this basis. Anticipate it might require a couple of days work. - Due date: Flexible

I need a garden shed purchased from Bunnings assembled in our garden courtyard. Loads of space in set up area. Super flexible with times. - Due date: Flexible

Looking for someone to help building a shed about 20sqm (intended to use as a gym) in the backyard , the ground is on a slight slope and need to build flat floor structure first . Please come to give a quote on site. - Due date: Flexible

WE have a new build and left over bricks that match our house and would like a letter box (Post box) built at the front of the driveway. We also need concrete put on the pavement to support council requirements (Pictures will be attached) Attaching a Picture of a basic postbox (Happy for you too add your design). Picture of the front of the house. - Due date: Before Friday, 23 December 2022

Treat and stain deck (est. 75m2) + jungle gym - Due date: Flexible

Here're installation tips https://www.youtube.com/watch?v=PC4ZK625Cic&t=83s&ab_channel=AbscoSheds - Due date: Flexible

Doing a quick reno on a townhouse. Kitchen (which is small) has had everything pulled out. We will be buying cabinets from Bunnings, and need some help with the install. The right person is not necessarily a cabinet maker or carpenter, though they do need to have some experience with kitchen renos, as we (my partner and I) know very little. I will be available to work with you, though I need someone to take the lead in terms of measuring, confirming we are buying the correct things, and installing cabinets. - Due date: Flexible

Looking for someone to sand back our 5m x 6m small wooden decking and re-oil or apply a deck coating for weather protection - Due date: Flexible

I have 5 ikea wall cabinets and two shelves to install in my kitchen in Warriewood this week. Day and time fairly flexible. Cabinets need putting together and the wall is brick. Please provide reference and your hourly rate.

Open up existing wardrobe cavity to allow for new wardrobes to be fitted. Remove waste and gyprock over bare framing as necessary. To b removed to ceiling height 250, depth approx 55 and internal width is 245. Actual door height is 206 and width is 192

Require a handy person to re-level outdoor kitchen/bbq cabinet. Cabinet sits on concrete slab with pavers but whole area has settled a bit leaving the kitchen bench tops out of level and the bbq slightly falling away from the grease trap. May require fridge to be removed and some entire cabinet to be re-constructed level with packets/screws to re-assemble to level.

Cornice addition to 3x kitchen bulkheads. Bulkhead #1. Approx 4m long, 600mm deep. Bulkhead #2. Approx 2.5m long, 600mm deep. Bulkhead #3. Approx 450mm x 600mm. As pictured. Cornice supplied / is on site at Warriewood. .

i need a double cat enclosure built into our cat boarding facility. hoping someone who has made one before and has design ideas. two enclosed rooms with door then enclosed outdoor area. - Due date: Flexible

Looking to get the deck and bench restained. Assistance with removing table and pot will be needed. Roughly a 7 x 7m deck. Material and equipment will be required

Plasterer / cornice installation required. ~35 linear metre of 90mm cove cornice (supplied/on site) to be installed by experienced tradesperson.

Supply and fit a timber panel wall - 100mm V-groove/V-joint lining board sheets. Length of wall - 4m.30 Height - 2m.60 There is a bracket for the TV and 7 power points Also to note - the panels will need to be taken up the stairs to the 2nd floor as they will not fit in the lift. Please refer to attached photos - the first being the finished look I am after. - Due date: Before Saturday, 16th Oct 2021

Need to fit some heavy duty shelving in office nook (to hold several hundred cookbooks!) Shelves have not been bought/made yet, would be good to get advice on what is best. Or, better, making the shelves to be added to the task Width of wall is approx 163cm, depth approx 83cm Price negotiable Need done ASAP

Need 3 fire extinguishers hung, cut a timber panel and install on wall. Warriewood square

Our garden shed which is about 3m by 2m was damaged with the heavy winds. The centre spine of the roof blew off leaving the side roof panels weakened. The one side roof panel also blew off and bent backwards at about a 135 degree angle. The right swing door also came loose. The roof needs to be repaired and door reattached.