Find experienced local carpenters in Warrandyte

Need a carpenter to take apart the piece circled and install back later after 30mins in order to pass pool safety.

Please refer to attached pics of my deck. The deck dimensions are 6800 (L) x 3800 (W). The deck needs to be prepared for ceramic tiling onto blueboard so that under deck storage is dry. This is what is required for this job: (1) punch down all lifted deck nails (refer pic). (2) lay Blueboard only on deck surface using silicon adhesive and blueboard sheet tacs, NOTE: The blueboard needs to be raised at house brick wall and laid with a small tilt towards wire balustrade to ensure water runoff (refer pic). You will need to supply blueboard. I will supply silicon adhesive and deck nails.

We need a total of 44.5m2 of James Hardie AXON cladding added to under our house. This includes enclosing underneath a deck area (See photos). I have attached detailed drawings showing dimensions etc. To complete our job you will need to supply: - Your own tools (Including saw with blade for cutting cement sheets) - All fixings (Screws or nails) - James Hardie approved sealant for between sheets (I have one tube here) - James Hardie Aluminum external and internal corners to join sheets at corners - Pine framing material to support behind cladding (These can be fixed to existing steel posts and you may need additional supports every 400mm in between) Some can be normal framing pine, under deck needs to be Treated pine. I will supply: - Unlimited coffee's from our coffee machine - All cladding sheets (See photo - they are 1200x3000 sheets) - A six pack of your choice when you finish the job

I am going to buy a 3 x 3 m garden shed, gable roof with sliding doors. We have a 3.1 x 3.1 m concrete slab. I am interested in recommendations of shed brands and estimate of installation cost. - Due date: Before Wednesday, 31 January 2024

I have noted some water stains on the ceiling in the kitchen that likely could be coming from the roof. We'd appreciate a handyman or someone who could help us identify and fix the issue please. - Due date: Flexible

Carpenter required in Warrandyte for 4 hours from 11am - 3pm. Work includes measuring, cutting, drilling & bolting down/installation of 50mm x 50mm aluminium angles. Also some basic Formwork. You will be working with a carpenter so pervious experience with aluminium angle not required. Basic carpentry tools required. Further work available Wednesday & Thursday if interested. - Due date: Needs to be done on Tuesday, 12 December 2023

Looking for quote to clean and oil/stain my deck. Unsure if also require some sanding. Deck is 1.4 meters by 5.6 meters. I have two much larger decks also to do, but will start with the smaller deck for this quote. - Due date: Flexible

I have some milled yellow box timber and I’d like a seat made from it - Due date: Flexible

Assembly of two sheds. 3 x 3m shed gable roof standard door onto concrete slab. Second is off the wall Garden shed 3.75m length, brick wall, base are large square tiles. Both are easyshed, did purchase the recommended concrete fixings. - Due date: Flexible

Small carpentry job. I have bought the same skirting board. Need someone with skill and tools to cut it and install it. I will paint it myself. All up 3 meters of skirting board - 2 lengths will need to be cut - Due date: Needs to be done on Saturday, 19 November 2022

Take down a shed - will be much quicker with two people. Reassemble shed about 30 metres Around the property. Will need dismantling. Shed measures 4.6 m x 2.8m and around 1.8m high. Refer to images for detail. - Due date: Needs to be done on Saturday, 12 November 2022

Need an experienced cabinet maker to help install cabinets - Due date: Needs to be done on Thursday, 3 November 2022

We have a kaboodle kitchen to be installed. We have taken out our existing kitchen This is a flatpack kitchen needing to be assembled. Finish must be of high quality as Kaboodle will be using the finished imagery of the kitchen on their socials - Due date: Flexible

Upcycle lovely Tassie oak ensuite cabinet into a floating cabinet. Bathroom reno -keep the original 70's timber but make it a contemporary. Need the help of a skilled cabinet maker. - Due date: Flexible

install a wood fire to a new location - the wood fire has been moved to new location and now needs flu kit installed - Due date: Before Friday, 22 July 2022

Hi I am looking for someone to add a curved edge feature to our wall cabinent. I've attached some images of the cabinent as well as the desired curve edge we're after We don't need it to be a functional cabinent door. It's just to finish the edge. Then also on top a thick ledge that we hope to plaster. I've attached images of the ledge we would like to add on top of the cabinents.

Supply and install modern wood heater to fit fireplace. Ideally the biggest wood heater to fit within the spare as the room is large with double height ceiling. Size is 130cm wide, 60cm high, 59cm deep. I have attached photo of the fireplace and the chimney. The chimney is clean as a whistle, bar a few cobwebs!

Hi there, I’m looking for a cabinet maker install natural timber look in our laundry. Looking for quotes please.

Looking to have a cabinet, shelves and doors fitted under an existing bench.

Assemble, install and level 2 straight rows of base cupboards (2565 and 3635mm in length) and 1 row of top cupboards (3635mm in length) plus x 1 corner top cupboard 400 x 400mm. No electrical, no plumbing, old kitchen will be removed, tops will be done by others. Any day from next Monday 5th July onwards.