Find experienced local carpenters in Taringa

I have solid wood benchtops to be cut, scribed and fitted in a renovated kitchen. L shaped, 1 mason mitre needed. Size is 2.4 one leg, other leg is 2.1, plus an 800 island. Hole cut for sink required. I'll seal and stain prior to final fit Walls are cement, cabinets are IKEA

Hi Airtasker, I'd like to get a job done to supply and install an internal door + an external door and other necessary materials. - The external door to be installed on the pathway to the house, it will need extention panel as you can see in the photo - The internal door will need some cutting job, as the door frame is shorter than the standard height Please provide a quote for the above job. (Also I may need some rough estimation for a two panel door 1800(H)x1200(W) for a garage - decided not include in this quote as still exploring options)

The bedframe has some scratches and minors dented lined on its polished surface due to improper handling by the removalists. - Due date: Before Friday, 12 January 2024

I would like a 2x sturdy shelf to be installed into my kitchen. 1 is intended to hold a microwave. The other shelf is for extra items. Located in Taringa. I also require a power point to be installed but that is a separate task. - Due date: Flexible

I have a small 2.5x1.5m deck with a corresponding wall hung bench (2.5m long) and 2 additional suspended bench seats approx 1.5x 1m each. All outdoors. - Due date: Flexible

Purchased Lifetime 69.8 x 136 x 171.7cm Vertical Plastic Storage Shed from Bunnings. Need someone to put together on our driveway. Concrete slab not required. - Due date: Before Friday, 20 October 2023

Replace four rotting wooden boards in the deck. - Due date: Flexible

Could I please request a quote to repair my West Elm mango timber, burnt wax, 6 seater dining table. Hot bowls have been placed on either side of the table and caused the faded patches and there's scratches into the two corners and a couple of other minor scrapes. Table dimensions: 183 cm Table Overall: 183 cm w x 99 cm d x 76 cm h. Clearance under table: 74 cm. Distance between legs: 98 cm. Overhang: 34 cm. Top thickness: 2.5 cm. I'm located in Taringa. If you could please provide a quote including pick up and drop off, if necessary, so I can submit it to the insurance company that would be wonderful. Here's a link to the table online: https://www.westelm.com.au/anton-solid-wood-dining-table-h4231?location=&quantity=1&attribute_1=183%20cm%20-%20Seats%206&attribute_2=Burnt%20Wax - Due date: Flexible

We need a stair gate to stop our baby from going down the stairs. Ready made stair gates don’t work in the space because of the way the stair banister is placed, so the sides are uneven. We need someone to look at the space and make us a stair gate and fit it to the stairs. It would need to be very sturdy to prevent a child from opening it or from pushing against it / breaking it. - Due date: Before Monday, 8 May 2023

Need a cabinet maker or handyman to make two 90cm×90cm lockable doors for plywood storage boxes using 6mm plywood. See photos for reference. All materials will be provided

I need a skilled trade person to remove an old laminate benchtop (2400x600x33) and dispose. This kitchenette has a sink with a tap to be considered. A new laminate benchtop (Kaboodle bought from Bunnings) of the same size is to be installed with a sink hole made. To finish the job, the old sink and tap must be installed back again. - Due date: Before Friday, 10 March 2023

I need a carpenter experienced in Deck repairs. This work is a bit challenging and need someone experienced which has done this type of works before. The deck is pretty old and has not been maintained well. I need someone to go through the whole deck and first find all areas which is not secure and work on making the area properly done and secure, this might require joists replacement at least in one section, and also post to be secure. Then all glasses around the pool need to be checked and confirm they are secured enough After carpenter finish the job I need nails to be checked and the boards fixed if needed. and lastly painting /polishing the whole deck. Please do not contact if you are not a business with ABN and also if you didn't do these type of works before. I'm happy for you to visit the site before final pricing as its difficult to price without visiting. - Due date: Flexible

Hello, I am looking for a licensed tradesperson who can install 2 x Bi-fold Doors which lead into 2 x bedrooms. I have purchased the doors - https://www.bunnings.com.au/corinthian-2040-x-820-x-35mm-internal-bifold-door-primed-mdf-stanford_p1910012 and the tracks https://www.bunnings.com.au/cowdroy-barracuda-bi-fold-door-track-system_p3980217. The doors and tracks will most likely need to be cut to fit. The doors are being delivered on Wed 8th Feb so anytime after that date will be suitable. If you have any questions please don't hesitate to ask. Thank you Lisa - Due date: Flexible

I need someone to: (i)pull down existing rubbish bin enclosure (ii)rebuild rubbish bin enclosure in merbau timber extending the length and width of the enclosure to fit two of the larger Brisbane City Council Bins 1100 mm x 680 mm (iii)merbau vertical slat palings to replace lattice (iv) apply two coats of silkkens Amount is exclusive of cost timber for you to source please, I will source sickens - Due date: Needs to be done on Sunday, 5 February 2023

Can measure up this weekend and install next weekend or do next weekend (I am flexible) 1. Remove set of sliding windows 2.Make and install open box like wooden window frame divider - finish and wood to be used to discussed (includes cost of wood, you to supply please) 3.re fit bedroom door handles (need to be able to cut long screws to size 4.Hang large mirror above duchess 5.Make 4 x small oak plugs for french table (where extensions used to be) and fit these - Due date: Needs to be done on Sunday, 29 January 2023

Hi, we need 18 sheets of 3mm or 4mm MDF accurately cut to size (1200 x 960mm). Can be cut from 2400 x 1200mm sheets (unless there is a better option). Detail drawings supplied. Will help organise supply of materials if you don't have on hand.. - Due date: Before Saturday, 28 January 2023

Kitchen cabinet in Gloss white Polytec 600mm x 720mm x 30mm Built and installed. I have added a photo of what the cabinet should look like. - Due date: Flexible

Need to cut out bench top by 10mm to fit new cooktop - Due date: Flexible

I need an old pool shed removed (approx 1.5 x1.3) and temporary fence out up in its place (approx 1.3). I also need a new garden shed installed (1.4 x1.4 x 1.8). Already have the garden shed. Need job completed by end June or payment by end June. Price to be negotiated. - Due date: Before Thursday, 30 June 2022

Restain gel laminate hall table (GLASS TOP) - needing: pre-prep sanding gel stain clear coat Needs to be darker, in between the shade of the other two images. Hall table has the glass top. Requires pick-up from Taringa and return upon completion. We work from home so are available. - Due date: Flexible