Find experienced local carpenters in Springwood

The ash timber slab has slight defects that need filling, The slab is 2.4 meters X 800mm X 33mm. The slab needs to be cut to fit between/ around two 50 x 50mm steel posts. To be set 900mm high against the two steel posts on one side and 2 X 30mm square legs on the other. Overall final dimensions approximately 800mm X 1630mm. Final finish on the timber slab to be clear, not stained darker, therefore the filling of its defects needs to be complimentary to that clear finish.

Apply wallpaper to one wall. The wallpaper is Self-Adhesive / Vinyl Wall dimensions are 3.1m long x 2.31m tall Link to product is https://www.etsy.com/au/listing/766589322/mountains-wallpaper-girl-room-removable?ref=yr_purchases&variation1=1332368545 - Due date: Flexible

Assemble Bunnings garden shed Bolt to existing concrete path Anchors are included with the shed apparently https://www.bunnings.com.au/absco-sheds-1-52-x-0-78-x-1-95m-zinc-single-door-garden-shed-with-anchors-zincalume_p0191307 - Due date: Needs to be done on Wednesday, 3 January 2024

Shape/cut, sand and seal raw timber chopping boards (1xLarge 2x small). Can pick up and take away to work on and return. They are off cuts from our newly installed kitchen timber bench. They are already the right shape but need plaining on each edge and sanding. I have sealant if needs be. - Due date: Flexible

Just needing a builder to check over our back deck and give advice on placing a lazy spa on deck - Due date: Before Sunday, 15 October 2023

Three doors in my home need your attention: 1. Affix kitchen cabinet door that has come off 2. Get sliding doors on built-in wardrobe back on the rails 3. Shave some length off timber built-in wardrobe door to slide over new carpet - Due date: Flexible

Need help levelling out the height on kitchen cabinets (already installed) in prep for stone bench top fitting. There are screw feet at bottom of the cabinets. All heights need to be precise within a few mm. A lazer leveller would be handy for this job. - Due date: Needs to be done on Tuesday, 22 November 2022

Half dismantled timber decking and dismantled timber to be removed. - Due date: Flexible

Builder looking for chippy to get a door installed at Springwood. X1 external solid door. Door has been cut to size. Door will need to be picked up from condel Park. Hardware supplied from old door

I need the old decking removal + rebuilding a new decking with steps (without fencing) as well as building the canopy. Preferably using old decking material & colourbond for canopy. The overall size for rebuilding the new deck is about 60sqm + canopy covered area would be the exact same as the decking area. Contact me if you require for more info & wanted to have an inspection first. - Due date: Flexible

OUR KITCHEN BENCHTOP IS 20 YEARS OLD AND HAS A BURN MARK ON IT SO I NEED SOMEONE TO MEASURE UP AND INSTALL A NEW ONE. LIKE THE LOOK OF KABOODLE BAMBOO BENCHTOPS. - Due date: Flexible

We need a Carpenter to install 9 new hollow internal doors and hardware. We also need a lock replaced on our front door. We have everything ready to go.

I have purchased 80 metres of Oscilott from www.oscillot.com.au which needs installing on top of a colourbond fence and around a shed. Here is a video of the installation: https://youtu.be/f-fa9IZU3f4   The installation guide can be found here https://oscillot.com.au/pages/installation Can be installed any day on or before 17 July

Hey there, my name is Gillian. I need to hire a handyperson to help me in Springwood NSW 2777, Australia. What do you need done? Installation, Assembly What is the type of property? House Which areas of the property need work? I need to install a plastic Bunnings shed (2x2 metres) . Plus a concrete base. There is an existing old shed that we will disassemble. The ground is flat and there is easy access to the site. Thanks What would you like the handyperson to work on? See my previous answer: concrete slab and install/assemble shed.

Please help with my Ikea kitchen benchtop installation. I need cutting and joinery for approx. 3-4 sections of oak benchtops, as well cutting recess for kitchen sink; - 1 x corner L section 850mm x 850mm approx. pictured - 1 x smaller section, 400mm wide pictured - 2/3 x long benchtops joined 6000mm approx. pictured - Recess for kitchen sink approx. 800mm (kitchen sink install is not required as plumber will handle) - Silicon seal benches to walls Benchtops and other materials are all on site, ready to go. Easy access and lots of space to work in. I can offer an extra pair of hands if needed :)

Clean & prepare deck and apply 2 coats Sikkens water-based deck finish (supplied). 1200mm x 2800mm plus 2 timber steps. Materials and tools supplied. Will need to be done in stages which can be on different days. Days & time all negotiable & flexible.

I need someone to cut into my kitchen cabinets to fit a dishwasher. Install not required of dishwasher itself. Thanks!

Merbau Decking staining.....

i have a studio building and i wish to build a diving wall to make a bedroom. the wall is approx.4250mm long x 2520 height with a new door way also i need a wardrobe installed with sliding doors inside the room: 2400mm L x 600mm D x 2100mm H with 2x sliding doors, 2 x sets of four drawers & adjustable shelving & hanging spaces

Surface clean then one coat stain of decking..... date negotiable.