Find experienced local carpenters in Oakleigh East

I have found an old table that had a sewing machine attached to it, which I have removed. I'm looking for an experienced person to fill the large gaps and holes where the machine used to be attached. Would then need some sanding down of the surface to finish it. Dimensions attached in photo. Table surface is 30mm thick. Looking for someone to complete the work on site at my house. - Due date: Flexible

Need to add understairs storage/cabinets. Remove the wall, add cabinets Paint it back The space is about 174cm in height and 171cm in width as shown in pic 1 The cabinets can be like reference pic 2 or pic3, happy to take quote for both. - Due date: Before Sunday, 23 July 2023

Need to install a basic kitchen from Bunnings for 1 person . - Due date: Flexible

Garage conversion required (half of existing garage) Size of room is approx. 3.15 x 3.50. A 3.15 wall, ceiling and a 2 door built in robe with drawers is required. Happy for inspection before quotes received. I have no idea what this will cost so ignore budget amount. - Due date: Flexible

Convert part of double garage into a temporary room (office). Supply and install window. Create new walls to enclose office space around 5200 x 3000 mm. Install insulation to ceiling and walls and plaster interior of room only. Paint ceilings and walls. Supply and installation of hybrid flooring, skirting and electrical. - Due date: Before Saturday, 22 October 2022

Assembly of Recess brand small sit stand desk. Instructions online using QR code. Dimensions & Weight Width: S - 120 cm Depth: S - 70 cm Height: 65 - 130 cm Weight: S - 46 kg Dual low-decibel motors with centimetre level adjustment Lift capacity of 125kg and an extended lift range of 65cm - 130cm Three stage columns and leveling feet for exceptional stability On the outside, a waterproof, scratch-resistant laminate available in maple or walnut On the inside, a heavy-duty, high-density particle board core made up of 80% or more of recycled timber Brushed grommet for cable routing - Due date: Flexible

The budget includes materials as well. The job need plaster, wood work, paint, plaster, insulation, cornice, frame etc. Taks 1. Extend wall in living area. Relocate ceiling duct by 0.5m. Relocate the existing light switch and add a new power point. Width: 1.9m Height: 2.7m Task 2. Room upstairs (Need to add a door and wall in 2.4m width). need to move the manhole a bit. Width: 2.4m Height: 2.7m Task 2.2. Wardrobe for Room upstairs with sliding doors. Width: 1.45m Height: 2.7m Task 3. Kitchen Cabinets with doors (match to color) Width: 1.6m Height: 2.4m or 2.6m (Plaster on top not needed if full height) Depth: 0.5m Task 3.1. Two drawers next to new cabinets- (Width: 0.56m Depth: 0.58m Height: 0.9m ) (match to color) Task 3.2. Single drawer only to existing open cavity (microwave space). (Width:0.60m Depth 0.55m Height: 0.39m Task 4. Plaster under the stairs. Width: 0.94m Task 5. Laundry cabinets with 2 doors Width: 1.2m Depth: 0.5m Height: 1m Task 6. Plaster Garage roof and walls. Single garage: 6m x 3.5m - Due date: Needs to be done by end of september 2022

Install garden shed as pictured and remove rubbish - Due date: Needs to be done on Tuesday, 9 August 2022

I need a laminex counter bench top to be cut and installed asap. I will supply the count top ( Bunnings Bench Top).

The boards are rotting away. Replace with Linnea from James Hardie. Corner post, and edge of chimney. Around corner to veranda also .Lengths of 1.57m and 26mm x 51mm posts on corner. East Oakleigh. Need boards to be supplied. Painting is optional. Quote for carpentry and boards and posts as a start. Thanks

Replace existing decking and install new Timbers. Dark timber only in the picture. Area is 2.4m x4m. I have the timber and materials. Just need labour

Need to remove existing carpet/vinyl, then sand and polish the floor boards in the hallway, 2 family areas, kitchen, laundry and toilet.

I need a cabinet/Vanity unit done for our bathroom/laundry.

The intended work is to enclose the rear Alfresco decking by providing sliding glass. The existing Alfresco is a part of the building and has existing roof. The estimated length to be enclosed is 14 m approx in 6 big and small rectangular segments. The height is 2.45 m.

I have a garden shed that needs assembly on artificial turf. Not sure if I need timber frame for securing shed, happy to discuss. Shed is 3.145 x 2.8 x 2.08 high.

Merbau. Deck is in good condition but needs a sand and stain.

We had a new oven installed, but the current space for the oven is not deep enough. It is approx 25 millimetres too shallow. We need someone to cut a hole in the cabinet at the back of the oven space, to allow the oven to fit. We also need some timber put in to fill the hole between the oven and the top of the bench.

Install 90 mm ush boral Sydney profile cornice throughout home. total length 200 metres. pls advice cost for installing.

We have recently expanded two doorways into our living room and need the new edges plastered and tidied up. There are 2 corners for each entrance and the top has been cut back just below of the cornicing. Reimbursement/cost of materials can be paid in addition to job payment.

Re-glue the cornice. It's about one metre in length. Will probably need re-painting once the cornice has been re-glued. I have the paints.