Find experienced local carpenters in Mont Albert

Need assistance to create cavity for wardrobe, may require some framing. Updating an existing wardrobe to make a bigger cavity in current footprint for future flatpack wardrobe to be installed. Plastering of cavity. Plastering to square off stepped wall in this room and another.

Saw this online - would love to have this cabinet built and mounted

Assembly and installation of two kitchens and two kitchenettes - Very similar design for 2 kitchens and two identical kitchenettes. - Bench top installation and appliances installation are not required - see drawings

Lay a new 86 mm x 19 mm spotted gum boards on existing timber sub-frame with stainless steel screws. Existing boards will be removed by owner. 7.71 m x 4.41m = 34 sqm or approx 420 lineal metres. Owner to supply pre-oiled boards from Bunnings, damp-course, screws only. Edit: where boards are cut I would need these oiled. Job not urgent. - Due date: Flexible

Need to clean up mechanic oil leak from a car in the underground car park. - Due date: Before Sunday, 12 November 2023

Looking for a carpenter/handy person to instal a handrail/banister on 2 outdoor steps leading up to the front deck of our unit in Mont Albert. E have elderly relatives who come to visit and need some safe support when using the steps. See photos. - Due date: Flexible

Hi there. We need to upgrade our electrical switchboard (putting in a 36 module Clipsal switchboard). The dimension of the switchboard is: Height : 560mm Width : 345mm Depth : 106mm In order the install a switchboard in a cupboard, the electrician has advised that we need to have our existing cupboard built out so that the switchboard can be brought up to the front as described below: The carpenter will need to box out the cupboard so that we can fit the switchboard on the face. Please make sure to build the box out larger than the width and height of switchboard dimensions mentioned above. Please also allow for enough depth for us to install the switchboard as well as being able to close the cupboard door when switchboard is installed. We will also need the front face to be able to be removed for ease of running existing and new cables behind the switchboard. There is already an existing switchboard in the cupboard that has been built out for reference of what needs to be done. Attached is a photo with a red outline of where we would like to install the new switchboard (ie. the part of the cupboard that needs to be built out). The existing switchboard that will be replaced is visible just right of this area.

I’m looking for someone to come and put together a absco shed. Pic attached. - Due date: Flexible

I require two 4.66m x 1.58m steel chief skillion roofed garden sheds to be assembled. All assembly equipment is provided which include floor bolts screws etc. The sheds are to be installed on an existing purpose built concrete slab. - Due date: Before Wednesday, 5 April 2023

There’s an existing space above our oven that we’d like to be made into shelves. - Due date: Flexible

I have an old 3x3 metre concrete slab that I bought a kit shed for (NB: I have already paid for the shed installation, I don't need this done, just fixing the slab), but the rebate on two sides is damaged and the installer wants it fixed first. The work might include removing some steel anchors, grinding or demolishing the jutting out parts of the concrete and repairing the two rebate edges, as well as some of the corner where the two edges join that has also been damaged. Must meet specifications for rebated concrete slab for Absco shed. The dimensions of the existing slab might be a centimetre or so off here and there. Will not consider higher offers or increase in budget after task is accepted. Will not consider out of AirTasker offers, including extras for materials, travel, etc. You must quote the full price for the job. https://abscosheds.com.au/garden-sheds/economy-range/absco-economy-garden-shed-double-door-3-00mw-x-3-00md-x-2-06mh/ https://www.youtube.com/watch?v=o_NNhqec8Ww - Due date: Flexible

Need 3 pieces of wardrobe board A and 4 pieces of wardrobe board B. Another 3 drawers bottom boards need to be changed to whole piece. Not like pictures show with big ugly holes😤 - Due date: Flexible

Install doors and drawers of Ikea Kitchen Note: - only require installation of the doors and drawers for 10 cabinets (see detailed breakdown below) - cabinet frames have been assembled and installed - stone benchtop have been installed - all cabinets are base cabinets - no wall cabinets/tall cabinets Detailed breakdown of 10 cabinets: - 1 pullout cabinet with two drawers to be installed (200mm) - 1 corner cabinet - carousel and folding door to be installed - 3 cabinets, each with 3 standard drawers to be installed - 3 cabinets, each with double doors and a shelf insert to be installed - 2 cabinets, each with single door and a shelf insert to be installed Preferably to be done this weekend. - Due date: Before Sunday, 20 November 2022

Fill the floorboard in the kitchen that's been cut out so they're level with the existing flooring Timber is supplied Work to be done by this weekend if possible - Due date: Before Sunday, 23 October 2022

Cut a small caesarstone benchtop on site and remove, modify and reinstall overhead cupboards. Photos available to make things clearer. - Due date: Flexible

Need to install x15 kitchen carcasses on timber base urgently for porcelain stone measuring.

Install engineered floorboard - approx area is 120m2 Engineered floorboard supplied (1830mm x 193mm x 12.5mm) Other materials can be supplied as agreed Install on top of existing pine floorboard (see attached image) Some surfaces are not flat/even Currently renovating - job to start in mid to late August - Due date: Flexible

Please provide quote to install the following joinery for our study nook. Please see photos for configuration 4x 900 wide base cabinets (2x doors each) 1 x 600 wide drawer unit ( 2x drawers) 3 x upright end panels Back of carcass on one cabinet will need to be cut to bring through 2x existing GPOs (for printer etc) 40mm kickers to be installed. Skirting board on one end will need to be cut back to allow joinery to sit flush against wall 8x handles to install There will be a stone top, but this has not been arranged yet. Doors/drawers are pre assembled and attached to carcasses Any questions, please ask - Due date: Flexible

Require a handyman to complete the following kitchen work: 1) Install Ikea kitchen benchtops over 3 areas (1 straight and 1 L shape of 2 pieces) 2) Cut and install 4 x side cover panels and 4 filler panels 3) Install Kitchen sink + tap (plumber preferred - negotiable) *Must have own tools and equipment. *Details can be discussed further once task is accepted. - Due date: Needs to be done on Wednesday, 8 June 2022

Cut out and replace selected rotten weatherboards and underside of eaves and panels under carport roof. Budget is for labour. Materials as required. - Due date: Before Monday, 16 May 2022