Find a local Tasker to help you make a kitchen cabinet in Inner South West Sydney

I'm looking get a quote to add some matching kitchen cabinets to the wall above the sink and add a tall matching pantry next to the bench. Included is a photo of my kitchen and a reference photo. -Wall cabinet height approx 900mm -Pantry approx 700mm or 750mm wide -White gloss colour

Alter my kitchen cabinet and install a dishwasher.

I need someone to come and replace the damaged kitchen cabinets and draws with identical ones that match the existing kitchen

Kitchen updates as follows: 1. extend right side of kitchen with laminated cabinetry to match existing kitchen build. This is needs to be from floor to almost ceiling like the other side of kitchen 2. remove shelving on side of cabinets on the left of the kitchen and extend matching existing laminated cabinetry 3. add doors to match existing laminated cabinetry to the cavity space above the fridge 4. Some of the laminate is also peeling off the drawers so will need to resurface these and perhaps all cabinetry to match 5. Hinges in drawers will need updating (I can send pictures of our old ones that need replacing and can send photos of some new ones we have that work well). We would need 10 hinges for this 6. There's a cavity near our oven that needs to be covered so we would need to fit this in properly. Could we make this functional somehow with a pull out spice rack or something? Would really appreciate someone with attention to detail and has the qualifications/experience to build something like this. Bonus if we can see some plans drawn up in advance of the updates - Due date: Flexible

Install Kitchen cabinet door and need to fill up little gap on the top of the fridge which is side of the kitchen cabinet - Due date: Needs to be done on Saturday, 30 September 2023

Need to cut 30mm of the doors and the cabinet to fit new fridge . Just the 2 doors and inside. See in photo - Due date: Needs to be done on Saturday, 23 September 2023

I want someone to make a customised kitchen cabinet that will be matching with my existing kitchen cabinets to extend the storage capacity. Its a small 2 doors wall mounted cabinet of approximately 2 metre wide, 400~500mm deep and around 1 metre high and must be mounted on wall next to existing cabinets. Photos of existing cabinets attached with propsed location of new cabinet in red markup. Please quote me the price. - Due date: Flexible

In need of a handyman or carpenter to make drawers for our kitchen cabinet. Also, potential other work for the house. Happy to negotiate an hourly rate. - Due date: Needs to be done on Saturday, 15 July 2023

Assembly and installation of a HOME OFFICE using 9 x IKEA METOD kitchen cabinets and 2 x worktops. No plumbing, electrics or wet area requirements. Size of room: 2.3 x 2.4m Walls are existing painted plasterboard Flooring is existing carpet Assembly / Installation as per attached IKEA plan Bespoke requirements include: ** Custom-built 12cm plinth (untreated pine, or similar) instead of IKEA cabinet legs ** Custom floating shelf with offcut from second worktop ** Installation of (client supplied) brackets to provide support for desk/worktop/shelf ** 2 x holes cut into worktop for computer cables Itemised quote to include ** All wall fixings/hardware ** New plasterboard 2360mm bulkhead and cornice to match existing - Due date: Before Friday, 30 June 2023

The existing kitchen cabinet is old and damaged, based on the existing location to do a new cabinet. - Due date: Needs to be done on Saturday, 10 June 2023

Cover the gap on top of cabinets. Approx 3500mm x 100mm Cut and apply the cover panels supplied - Due date: Flexible

Just need one handyman to help my husband with below: 1. Benchtop cooktop hole to be cut out and 3 pre cut to size slabs to be joined to base cabinets.( L shape kitchen) 2. 7 assembled top cabinets to be attached to the wall. - Due date: Before Sunday, 18 December 2022

I planning to built in pantry in my kitchen. The size is 181cm(H) 72cm(W) 60cm(D), it meant to be refrigerator site. I want to 3 drawers (size would be 25cm each) and few shelves. - Due date: Flexible

Both of my corner cabinets in the kitchen have become unhinged and the struggle is getting them put back properly. I found the closest size of hinges I could from bunnings so it's really just putting them together.

I have a kitchen cabinet with a Synthetic quartz bench top, sized 146cm x 90cm. I need to cut the cabinet to size 146 x 60cm (30cm less from the back which is feasible) to fit into my kitchen. Need to cut the quartz top and plywood cabinet. - Due date: Flexible

Looking for a joiner or carpenter (or similarly skilled and qualified person) to install custom, made to measure kitchen cabinets and an island bench in Penshurst. Cabinets are made from polytec with Blum hardware. Delivery of cabinets is expected 24 June. Would like installation as soon as possible afterwards. Pictures of the designs and room are attached.

i have 6 floating kitchen cabinets that i need disassembled and reassembled from the shed into the laundry.

Looking for a local cabinet maker. In my kitchen we have this nook. Dimensions are around 400mm wide x 500mm deep x 2.7m high. To make use of this space I want to build a custom shelves (similar to image attached) to fit this space. Some fixed shelves and some can be moved. No doors needed. We have 2 of these nooks so we need 2 shelves made. - Due date: Needs to be done on Friday, 6 May 2022

Modify existing kitchen cabinet above fridge by shortening the cabinets height to accomodate new fridge. Approximately 10cm to be taken off from the bottom.

We have some new Ikea Meton cabinetry. I would love a handier second pair of hands to: 1. help install the baton on a masonry wall 2. level the cabinet to match the rest of the kitchen 3. cut the wooden benchtop to size with own drop saw. I can attach doors, drawers etc myself, just would love someone handy to do the more structural work. - Due date: Before Sunday, 20th Feb 2022