Find experienced local carpenters in Killarney Vale

Shed purchased, concrete slab down. Shed size 3.75x3m.

An outside round table made around a pole. Oak look. Height bar stool height (106mm). 600mm wide around a pole that is 11mmx14mm. Thickness around 3.5mm. No kegs preferred and ideally attached to the pole.

We have just moved house and our fridge does not fit in the space due to skirting board on one wall. It needs to be removed and repaired to get fridge in. - Due date: Needs to be done on Friday, 20 October 2023

Looking for removal and Installation for 2x bathroom, 1x laundry - 2x bench top and sinks. 1x bathroom - cabinet and sink around 1500mm in length -floating 1x bathroom- cabinet and sink around 1780mm length (wall to wall floating cabinet) 1x laundry - 1x bench top 109 cm length with sink, 1x bench top 180cm length - Due date: Flexible

Extend existing concrete slab (from 2.6m wide to 3m wide), then assemble and install new Absco 3x3m colourbond shed using supplied concrete anchors. 2 person job. - Due date: Flexible

Installation of an Easy Shed - Panels have been put together - Installation of structure supports required into a concrete slab - Shed size approx 4.5 x 3m - Due date: Before Wednesday, 30 November 2022

* Desk & Shelves mounting. Bottom panel maybe on rail attached to studs. Top shelves floating. (Panels are lacquered but not cut) * Laundry table top install Cabinets are built. Timber panel need to be secured on top of sink cabinet and secured to tall cabinet. Holes required for sink and pipe through to machine. No cutting required for this timber panel I believe. - Due date: Flexible

Install 2.25m x 2.25m flat pack shed from EasyShed on an existing concrete slab - Due date: Flexible

3 posts replaced to merbau posts (recommendation if 90x90mm suitable). Front deck mostly on concrete with small landing in front of door. Merbau decking. See picture for dimensions. - Due date: Flexible

I need help putting up a shed in garden. Slab laid. Size in photo. Please no time wasters.

Erect 4.4 x 2.25 garden shed on concrete slab - Due date: Flexible

We need a shed building! Ideally someone who can also do the concrete slab, but if not I can organise that separately). The shed is 3m x 3m.

Extend a room on to a verandah - Due date: Needs to be done on Thursday 2oth January

- need slab extended - not a huge increase. - current dimensions are exactly 2.8M x 1.9m - need it to fit a 3.75m x 2.25m new shed - the bench in the photo can be easily moved - I just left it on there today. - please no time wasters.

alterations to oven cabinet to include microwave space and possible draw below - Due date: Flexible

I need a shed flat pack put together. Slab already poured and set. Shed is a absco 4.48m x 2.26m x 2m. - Due date: Flexible

The structure of the garage is built on a base of four 60x40mm galvanised RHS portal frames, with extra bracing on the front and back portal frames for even more strength where it’s needed. Coming from a roof truss only design, it is much stronger and will last you years and years. The wall and roof panels are 0.4mm colour sheets with specially designed vertical ribs which are deeper than what you would normally find, which uses more material and makes the overall structure stronger. As wholesalers, we know better than anyone that steel is sold by the ton. We won’t cheap out. The construction is easy with the step-by-step instructions and experts just an email away. Here are the steps: 1. Frames, 2. Walls, 3. Roof, 4. Finishing’s. Just assemble the pieces into parts, and fix the parts in place. The screws even drill themselves. The maintenance is straight forward as well. Dirt and grime are best if hosed off once a year. Dints can be hammered out. While we use a high grade, hard steel; the thickness and hardness ensure that your walls and roof won’t shear or puncture unlike some other ‘harder’, thinner steel. The garage shed package will include 4 sets of portal frames with steel brackets and 60x40mm RHS tubes, Steel Sheets for your walls and roof, pre-assembled doors, pad bolt, door handle, trusses, anchor brackets, all the self-tapping screws you need + extras, screw caps washers and of course, the step-by-step assembly instructions. Specifications External Dimensions: 5.1m (D) x 3.45m (W) x 2.3m (H) Wall height: 2m Ridge height: 2.3m Access Door: 1.95m H x 0.83m W Barn Door: 1.95m H x 2.47m W Box Details Carton 1241 x 13 x 13cm - 26kg Carton 2202 x 25 x 17cm - 44kg Carton 3208 x 97 x 13cm - 123kg Carton 4202 x 97 x 12cm - 105kg

Timber benchtop to be made and installed in laundry. Rough measurements are 1700 x 750 and needs to fit around sink All materials and tools won’t be supplied. Pictures attached are our laundry and what we would like. - Due date: Before Friday, 1st Oct 2021

Provide a fit person's strength and flexibility to various tasks in an owner build of a granny flat extension.

Hey there, my name is Russell. I need to hire a handyperson to help me in Killarney Vale NSW, Australia. What do you need done? Assembly What is the type of property? House Which areas of the property need work? Need a work shop shed finished off What would you like the handyperson to work on? Finishing the shed that we have started but as I work can only do it weekends and would like it finished sooner than later