Find experienced local carpenters in Grange

Creating a large planter box Looking at getting a raised garden bed completed. Looking at getting a render or concrete box. Measurements are about 8.7 m long, 0.5 m high & 0.5 m wide.

-Roughly 12m x 3.9m -Will need to be dismantled in Largs -Transported to Grange -Re-assembled in Grange

I have 3 wardrobe sections that need to be carried up the stairs, unpacked, built and installed to our walk in robes. Ikea have designed it and delivered it to our garage. I have the plans for you to build it. we need it built and attached to the walls. the wardrobes are heavy to build and will take many hours so if 2 people can do it it will be preferable. there is limited space from the height of the wardrobe to the ceiling so you will need to secure. you will need to supply brackets to secure to the wall I think. What ever cost you want to put on this job is fine, I have written $500 but can do more- I just want it booked in and done really quickly. please refer to attached photos. the corner system will go into a walk in robe to build and secure and there is 2 x systems to build that are in the 2nd photo. There will be flat against the wall opposite each other which is in a nook within our bedroom. to build these there will be approx 2m x 3m space within our bedroom but you will need to move them into the walk in robe or nook to secure to the wall, alternatively you will have to build them standing up inside the walk in robe or nook. Ceiling height is 241cm. we have a cornice which makes the ceiling height 237cm. we also have skirting boards at the bottom. you will need to provide brackets and equipment to secure to the wall. - Due date: Needs to be done on Thursday, 28 September 2023

We wish to install a Velux skylight in our annex. We have sourced the window supplier who will supply and install the window, but we need a carpenter to measure out the space and install the window frame. - Due date: Flexible

Looking for a carpenter to adapt kitchen cupboard to fit a 45cm (smaller than regular size) dishwasher in. - Due date: Flexible

1.5 L x 1.2 D shade house lattice and or shade cloth - Due date: Needs to be done on Tuesday, 31 January 2023

Large pivot front door needs to be sanded and re-stained as the bottom of the door has started to peel. - Due date: Before Saturday, 14 January 2023

Remove existing bunnings shed. 3000 x 780mm - Due date: Flexible

Outdoor area - floor needs to be built up so its the same height as indoor and then covered with carpet - Due date: Before Friday, 16 December 2022

I need a bunnings shed built. 3 meters x 2 meters steel. Shed details can be foumd on bunnings website IN0084389 - Due date: Before Friday, 26 August 2022

Installation/attaching of mdf wall panels (purchased at Bunnings) for bedroom feature wall - Due date: Flexible

erection of kit verandah - person must builders licence - Due date: Flexible

Garden Shed - 3 x 3 x 2.6 - Due date: Needs to be done on Saturday, 26 March 2022

Remove existing L-shape built-in wardrobe Remove and dispose of mirrored sliding wardrobe doors (2.6m high) 2x doors 265cm high by 92cm wide 2x doors 265cm high by 39cm wide It’s just rails inside the wardrobe with a shelf and corner post. Touch up ceiling as needed so it’s ready for me to install new units. - Due date: Flexible

Install ikea cabinets in laundry and laminate counter - Due date: Needs to be done on Monday, 31st Jan 2022

Put together ikea flat packs and install cabinets onto above wall areas and below sink and also cut and place laminate bench - Due date: Needs to be done on Monday, 17th Jan 2022

Lower existing shelf and put 1 x half size shelf underneath. Shelves purchased from Bunnings recently.

I would like to remove part of a cupboard in my laundry so I can fit my dryer in there. Need cabinet maker or skilled carpenter. Located in Grange

Hi i need someone to install indian wooden temple. It will be very easy just like open wardrobe. I will give dimensions as well

Kit form shed only installed size 6x8. I have a kit style colourbond shed.