Find experienced local carpenters in Elsternwick

See image of the proposed downpipe. Also see image of the existing downpipe, which is on the right side of the proposed area.

I need to install French or bifold doors to separate a living space from a study / work area. The dimensions are not of standard sizes so looking for advice on different options available and potential solutions. Verbal advice initially, with potential for installation opportunity later.

Changing three sets of current drawers into 1. A cupboard with one shelf (two to be changed like this) 2. The bottom two drawers joined to be one large drawer with heavy duty runners Would require coming to measure. Materials paid for separately by me.

We have an exterior wooden panel that has deteriorated and need changing . Easy to access and probably 1 metre of wood required . ( no need to paint ) Material not included . I have another similar task that I can talk to you about after the job is completed

Hello, I have a couple shelving/carpentry jobs that need doing. I don't have any of the materials so they will need to be factored into the cost. 1) I would like to add a shelf to an existing closet. The right end of the shelf will need to be notched as there is an electrical conduit that runs vertically and won't enable a flush shelf (see photo). Approx 110cm x 51cm. The closet is inset into a cavity surrounded by bricks, but there appears to be an air pocket between the bricks and the ply(?) board backing (confirmed by an electrician who just installed an outlet there). Please let me know how you propose to stabilise the shelf. 2) There is an existing storage closet that currently has 4 shelves built in. I would like the bottom shelf removed if structurally possible. In addition, I would like the remaining 3 shelves to be cut in half (so that I will have half of the closet available for vertical storage. So the shelves will need to be sawn in half and then supports added for the half that remains. Please provide me with a quote based on the request above, including material costs and what material you propose to use for the shelving. Thank you!

Need skirting boards installed around 2 x bedroom wardrobes I have the MDF wood, liquid nails and gap filler Wood to be cut, mtired and fitted Location Elsternwick

Hi there, I am looking for a professional floor repairer to sand and polish 60 sqm of Tasmanian Oak flooring in my apartment, including a section with a moisture stain (likely from an appliance leak) as per the photo

install 3 standard circular stainless steel door handles.

Large dining table to be sanded back and stained with 2 coats of oil based polyurethane. To include all surfaces of table (ie inc. Underside ) and legs. Happy to supply product for finish, you must provide all tools required to compete the job. Table measures 2600mm x 1050mm. Large deck with power available to complete work on (can help to move table there) - Due date: Flexible

I have a wooden fence and gate in the front yard that needs sanding and re-staining on both sides I will - Provide the stain for the fence I would like you to - Remove and reattach the letterbox from the front fence - Remove and reattach the latch from the gate - Provide your own tools as required to sand and restain the fence, including drop sheets - Sand and restain both the inside and outside of the fence - Due date: Flexible

Cut timber (provided) to fit laundry + cut hole for sink + install as benchtop undermount - Due date: Flexible

Remove existing walls (2 sides) Ensure structurally sound. Convert 1 side into shed (build wall and add door). Plaster / gyprock ceiling Install timber deck

Church pew, cut in half with tw new ends made - Due date: Flexible

Catflap through our plaster wall and exit through timber boards.

We are looking at creating a very simple floor to ceiling wardrobe that wraps around the door (so full wall, excluding the door). Details are: -4.4 x approximate 2.4 room (minus door) -Two repeated configurations- aka- a shelf and hanger hybrid and a drawer and shelf hybrid. This should repeat to accommodate two people. -Further closed storage above the main doors for larger items, that extend the room. -A shoe cubby on the small part of the wall to the left of the door, filling the space. -Simple and clean design, with exterior ready to paint. I hope that's clear! There are currently doors on the 'wardrobe' as seen in the photos. If it's possible, we would like to reuse them as they are good material, but not at the expense of an inconsistent unit. I'll attach the room as well as some references. Looking to spend on the lower end of the 2-5k if possible and materials can be provided if that is helpful to the price. Due to slight damp, we preference not too much laminate. (white room with the corner window and white shelves is our house) - Due date: Before Saturday, 25 November 2023 Budget is the absolute most we can spend sadly- we know it's low.

We are looking at creating a very simple floor to ceiling wardrobe that wraps around the door (so full wall, excluding the door). Details are: -4.4 x approximate 2.4 room (minus door) -Two repeated configurations- aka- a shelf and hanger hybrid and a drawer and shelf hybrid. This should repeat to accommodate two people. -Further closed storage above the main doors for larger items, that extend the room. -A shoe cubby on the small part of the wall to the left of the door, filling the space. -Simple and clean design, with exterior ready to paint. I hope that's clear! There are currently doors on the 'wardrobe' as seen in the photos. If it's possible, we would like to reuse them as they are good material, but not at the expense of an inconsistent unit. I'll attach the room as well as some references. Looking to spend on the lower end of 2-5k if possible and materials can be provided if that is helpful to the price. Due to slight damp, we preference not too much laminate. (white room with the corner window and white shelves is our house) - Due date: Before Saturday, 25 November 2023

Hole to be cut in wall - interior is plaster board, exterior timber weatherboard - and then cat flap to be installed. - Due date: Flexible

My office chair wore the floorboards in the study and created a circled stain - It needs fixing - Due date: Flexible

I need a bike shed built asap, Dimensions are: 2.26 x 0.78 x 1.31m - Due date: Needs to be done on Thursday, 14 September 2023

I have a shallow exposed brick and metal frame cavity in my living room where an old defunct gas heater was removed. I would like this to be plastered in an arched niche fashion (similar to this: https://centsationalstyle.com/wp-content/uploads/2021/03/bathroom-arched-niche-768x974.jpg ). The cavity is floor to ceiling (approx 2.4m height and 47cm wide) but the top part just needs to be sealed up and the cornice replaced. No painting is required. I will be adding wooden shelves at a later date. - Due date: Before Saturday, 16 September 2023