Find experienced local carpenters in Collaroy Plateau

Have an old combustion fireplace. Require experienced trade to install new one in same position. Had one in mind from Bunnings so will buy all materials required . See photo

3 internal doors sticking in architrave . Need planing

We need someone to help install a standalone IKEA kitchen cupboard onto a dry wall. This job will require someone to find the studs in the wall, cut the metal railing to size, attach the metal railing to the wall, finish assembling the cupboards (we have already completed 8 of 16 steps), attach the cupboards to the wall, cut MDF board (provided) to size to cover the gap between the cupboard and the wall and install a dimmer light within the cupboard. IKEA instructions for assembly are provided. We would like someone with previous experience installing IKEA kitchens. - Due date: Before Friday, 29 September 2023

Hi There, I'd like to attach a design layout with measurements for a built-in wardrobe quote please (approx 2500mm wide). Points to note; - the attached includes a depth of 615mm but the drawer depth was only about 400mm so we'd want to maximise as much of that depth for drawer space as possible, i.e. 550/600mm - we'd need a carcass going to the ceiling ideally a thin wall on the right side rather than just the edge of the wooden wardrobe so it's 'built-in'. - Could we get some price variations for doors please as follows; - 2 sliding doors (this is 2500mm wide so not sure that's possible) - 5 hinged doors - 5 hinged doors but with mirror on central door - 5 hinged louvre doors - An indicator of start/completion date would be great too, thanks. - Due date: Before Wednesday, 1 November 2023

Very carefully without damaging the existing kitchen and workmanship: -Modify the overhead kitchen cupboards to fit in an overhead microwave into an overhead cupboard. May need to move the dividers inside the cupboards to make room for the microwave. Narrower leftover cupboard spaces next to the microwave is fine rather than using filler pieces. May need to reinforce the cupboard to accommodate the weight of the microwave is fine. -Replace the existing overhead cupboard door at the microwave location with a half door covering the cupboard directly above the microwave and open cupboard for the microwave itself. All new cupboard doors are to match existing doors in colour and finish. -Realign the overhead cupboard doors so they are aligned up, at the moment there are big gaps and small gaps in between the doors. -Properly refix an existing loose end panel at the end of the kitchen bench. I need someone to come out and have a look at the job and give me an itemised quote. - Due date: Flexible

In two boxes Garden shed from bunnings(must have done this before) 3m x 2.96m - Due date: Needs to be done on Monday, 24 April 2023

Internal wood sliding doors need to be raised as they are now too low for new carpet. 4 doors - Due date: Flexible

Bedroom 1: plain white matt walls and ceiling Bedroom 2: plain white matt walls and ceiling Bathroom: plain white matt walls and ceiling Outdoor decking: 10 x 5 m deck, routine freshen-up for summer Offer needed by end of today (later evening) Job needed complete by end pf Sunday If more work is needed than described, I am happy to add some $ The deadline, and a professional job, and most important. - Due date: Before Sunday, 18 December 2022

Quotes for custom made wardrobes for new dwelling. And would like them manufactured and installed in next two weeks. 3 walks in and 2 built in wardrobes and 1 linen closet. Sliding doors, in poly if possible for built ins (but understand this may be difficult due to painting turnaround). White melamine in linen and built ins and polytech or something similar for walk ins - Due date: Before Wednesday, 9 November 2022

Replace buckled deck boards with thinner boards. Retaining wall is pushing existing boards together. We’re planning a home renovation and the deck will be demolished in 12 months so it’s a temporary measure to tide us over in the meantime. The area affected is roughly 7m x 1.5m plus one other small deck that needs 2 boards replaced. Frame and joists are ok. Budget excludes materials. - Due date: Flexible

Our dog urinated on our floor boards. Can we repair this? Or do we need to sand/ repair the whole back area?

I’m out of my league here, I’ve attempted it but it needs someone who has experience in carpentry and caravan angles. Will need to do both the back wall and the corner to be done. I have all the materials including insulation. It’s a Jayco pop top back wall 2m

I`d like to know how much you would charge me to built a storage like that with solid timber, the measurements is 11m (W) X 2m(H)? Similar to the one in the photos attached. Located in Collaroy and I need it done ASAP. NOTE: the STORAGE on the photos have been removed due the flood damage, was dangerous and the wood soft, I need something solid and if possibe, water resistent. Please provide quote - Due date: Flexible

Carpentry experience needed to batten out a flat roof. As the batten work will only take a few hours I would require some help laying some roof sheets to fill out the day. Thanks - Due date: Needs to be done on Tuesday, 5 April 2022

A built in wardrobe needed, measured 2400 high 1600 long. Sliding doors can be mirror or plain, One side shelves the other hanging space - Due date: Flexible

Varnish a Timber Decking area - Due date: Flexible

We have 8 shelves to put up n our walk-in. They’re are a tad big so will need to be trimmed. Thanks so much - Due date: Flexible

Our dishwasher is stuck.I have a new one to replace it but the old one needs to be removed first. I was told to get a carpenter to take one of the panels off so the dishwasher can be removed then replace the panel. - Due date: Needs to be done on Friday, 29th Oct 2021

The oven I bought is very slightly too big for the space in the kitchen. I’m seeking someone to remove the rear kitchen panel and sand/plane off 1-2mm off the bottom panel so the oven fits.

I need the top panel of my kitchen cupboard removed or cut smaller. I have an appliance to go in the space and I am a few millimetres short of height. - Due date: Before Monday, 18th Oct 2021