Find experienced local carpenters in Coatesville

Build easy shed off the wall shed. Attach to wall and deck.

Need this compressor to be moved up to allow for new decking. Quote must include all requirements to move it.

I need some kitchen cabinets, overhead, floor and a bench top removed from a house in oakleigh and installed in a house in Frankston. Details: Benchtop: 1580 wide x 600 deep Bottom cupboards: 900 high x 530 wide (each) Fridge space: 515 wide Overhead cupboards: 1580 wide x 850 high

I can buy plywood and caster wheels from bunnings. You must have necessary tools to complete the job. Looking to make 2 wooden cabins. Dimensions/ drawings can be shared after initial contact.

Looking for someone experienced to install a garden shed on a concrete surface. Measurements are 3m x 1.5m Brand new flat pack, refer to image for brand.

Experienced Carpenter with care and attention to detail. (Materials supplied - sheets of Premium Plywood 9mm thick - 2440 x 1220) I need a carpenter to cut and affix Ply pieces (sheets of Ply supplied) to each side of these "fins" protruding from Round Pillar. There are 2 x Round Pillars - each has 16 Fins (double sided) Works to occur after and before hours. Can be completed in own time over the following period - to be completed by Tuesday 5th March. Friday: anytime after 9pm Saturday: anytime before 8am and after 5pm Sunday: anytime before 8am and after 5pm Monday: anytime before 8am and after 5pm Tuesday: anytime before 8am and after 5pm Someone will meet you onsite and talk through job detail. Price is for job completion.

For you to understand what I need to be plastered, I need to firstly explain the following. I had a room with only three walls to the room and there was a large opening to the room Basically I closed off the opening to the room by installing some bi fold doors. A frame had to be built around the opening in order to install the bi fold doors. I now need a quote to have the frame that was built around the opening to be plastered. Plaster needs to go on the outside of the room and on the inside of the room. I will arrange to have the architrave put in around the frame once the plaster has been done I have drawn up and measured the frame for you to get an idea of the materials needed and work involved. I have also taken pics of the room standing outside the room and standing inside the room for you to get a better idea of what is involved The measurements are the same for both outside of the room and inside of the room. Please let me know if I have missed out on anything - Due date: Flexible

Looking for experienced cabinet maker to install kitchens - Due date: Flexible

4 Subway stores to be renovated need experienced carpenter to build bulkhead, wall, kickers etc. - Due date: Flexible

Renovating and kitchen’s doors need replacing only. Need a cabinet maker or similar to measure, arrange replacement and fit on existing hinges. No need to rip out kitchen. - Due date: Needs to be done on Wednesday, 13 September 2023

I accidentally burned part of the laminate of the kitchen benchtop. And now I wanna seek help for resurfacing the benchtop. I would pay for materials and your work. Thanks for the favor. - Due date: Flexible

Rooms to be build. Framing and plastering required. No ceiling required. 1x 12m wall with 4 doors and then 3x 3M walls to divide and make the 4 rooms. Summary: 1. Approx total 21m of framing and plastering and about 2.4M height. 2. 4x doors and frames Please quote - Due date: Before Sunday, 1 October 2023

Dismantle existing shed, Replace with a new shed that would still be in a box on a cement sheet base. Cement sheet and shed will need to picked up from a store. Discard old shed. - Due date: Flexible

Installation of shaving cabinet doors - Due date: Before Wednesday, 24 May 2023

Enclose balcony using a tarp to prevent water from getting into balcony while repairs are being done. Tarp has been bought. - Due date: Flexible

Hi , I am looking to remove ( including tip)old hardwood subfloor and install new solid wood timber floor. Are to cover is 4*3 meters. I will supply new solid wood for flooring. - Due date: Flexible

I need a cabinet maker to assemble 15mm plywood panels together with hinges and shelves to make an outdoor bbq. All the plywood will be cut to size by plyco. There are 4 cabinets all with doors. Overall length is 3m I've attached a sketch of the bbq and cutting list from plyco. I have a single garage where it can be done.

Supply and fit new eave to back porch. 9.35m long x 0.80m wide - Due date: Needs to be done on Saturday, 5 November 2022

Expand existing 45cm dishwasher slot to standard 60cm, and replace any impacted cabinetry as required. This is a new kitchen so I'm hoping to do so without removing the caesarstone countertop. I'm hoping to get advice on whether either option is possible and a quote that includes both labour and materials. The cabinetry is a white, smooth matte finish with an angled top edge for ease of access (no separate door handles). The budget is relatively flexible, pending final scope of job. Please reach out if you need more detail to quote or have other suggestions of how to expand the dishwasher slot. Option 1. Expand existing dishwasher slot to 60cm. Replace what's left of neighbouring cavity with drawer or cupboard. Option 2. Move dishwasher slot closer to sink (not under sink) and replace existing slot and what's left of neighbouring cavity with wider drawers or cupboard. More info: - The current slot is 45cm and requires 15cm to be taken from the neighbouring cabinet. - The neighbouring cabinet is approx. 91.5cm and has two doors that open into the same cavity. - The length of the countertop (except the part above the current dishwasher slot is glued to a wooden base. - The cavity is screwed to this wooden base from above (screws can’t be seen from inside the cavity). I'm hoping the cavity can be somehow disconnected from the wooden countertop base so the base stays glued to the countertop to hopefully avoid cracking the stone. Due date: Flexible

I need someone who has experience in cabinet making. I need to put two kitchen doors on top of my fridge obviously has to match the rest of my kitchen which is a provincial style. Photo attached. Anyone here that can do this for me? - Due date: Flexible