Find experienced local carpenters in Cairns City

I got a a couple of floor boards that have buckled up, possibly to do with water that got in between. The boards are sitting on top of tiles. I don't need any boards replaced. looks to me we can shave down one board and glue them all back down to make the passage safe as it is in a business. This task would need to be completed by 10:30am. Any day is fine. I will attach a couple of photos.

Need 4x kitchen drawers made for this space. Send your quotes :) Have 2x of the original drawers if that helps but I want the new ones made longer (deeper) to fill the space.

Hi taskers We have 4 heavy timber doors (approx 100kg) that need to be moved from our shed to be placed back on their sliding rails about 50m away. This will require 2 or more people depending on your lifting ability. - Due date: Needs to be done on Wednesday, 20 December 2023

Remove deteriorated skirting board and replace, paint to match existing. Install 3 x access panels- see images. - Due date: Flexible

Straight forward. Bit of box section welded to a winch plate. Link to similar build https://wranglertjforum.com/threads/new-tj-owner-front-and-rear-bumper-budget-build.7627/ - Due date: Flexible

We need to remove the current desks, add a bench top around the whole outside (no desk dividers go on the desk it will all be 1 long bench). Add a center table with storage underneath. This will involve adding some data points around the wall and phone ports (approximately 6). If we can reuse some of the current materials that would be fantastic! The sooner the better. Attached is a draft of what we'd like to accomplish. The other photos are what is currently there. - Due date: Flexible

Is there anyone in Cairns who can confidently remove a 3 way approx 110l fridge/freezer and install a 12volt only one of the same rough capacity. Need finish and trim. Thank you - Due date: Flexible

I need a absco Bunnings garden shed built . Have concrete slab and shed . Everything is ready to go . She’s size 3m wide by 1.5 deep by 2 high . I am happy to assist during the construction to make things easier . Would like the shed built as soon as possible . Date is flexible.

Have three VJ panels measuring 900 high by 1200 wide. Need to attach panels to outside of kitchen bench. Hole needed to be cut for power point. Height of bench is approx 880mm, two lengths are 1650 and 1550. One panel will have to be cut and joined at corner, panels are easy craft panels with tongue and groove to connect. Can supply the wood adhesive for panels and silicone for join. Will need a saw, jigsaw and nail gun to complete, Located at kewarra beach. Need someone with carpentry experience, flexible with times and dates Thank you Alex

I am looking for someone to do a proper design of these benches that are partially built to provide to a carpenter. I need someone to meet me on site at Manunda so I can explain what else need to be built by the carpenter so it can also go on the design. The current carpenter can't finish it without me providing a design and it is easier for me to organise a design than trying to find a new carpenter at the moment. Will definitely need one on-site visit. I have a sketched little design (not to scale) that has measurements that I can provide. Cheers, Lucy - Due date: Needs to be done on Sunday, 30 October 2022

I am slowly converting my van (as I can afford it) and it’s time that my current make-shift BedFrame is upgraded. I’m open to offers and suggestions but I don’t have a huge amount of money so I’m not looking for anything fancy; if I had the right tools and space I’d probably give it a crack myself - so as long as it’s sturdy and fits, I’m happy. I already have some of the materials, it’s really just the legs/supports that need doing. Let me know if you’re interested and I can give more info 😁 - Due date: Flexible

Cabinet maker or carpenter to Install some ready made cabinetry. I have 4 sites around cairns that require installation of the ready made cabinetry. You will be required to pick up the unit from Koah and install at Koah, Cairns North,Woree and Gordon vale. Approx 1.5hrs per site - Due date: Needs to be done on Wednesday, 6 July 2022

Shed structure needing to be completed. Has roof and poles, and one side done. Have some materials ready, just need gates installed onto frames and 2 sides closed in. Want height to be 1.8 - 2m. Also have pavers to place on front and back of slab.

Build Veggie patch.Prepare the ground. Use treated pine. Bring all tools. Buy timber and materials from bunnings . Bring to location. Build 20*4 m in total size veggie patches. - Due date: Flexible

We need a carport with 2 closed in sides for a caravan in a backyard. We need a concrete slab laid and an old existing shed pulled down. The measurements are (W 3.8m) (L 5m) ( H 2.8m) - Due date: Flexible

We require skirting boards removed and replaced (on tiles) with either the same design as the original ones or close to the design. Please refer to photo of current design The height from floor base to top of skirting board is 7cm We would need approximately 20-22 metres of skirting board Could you please provide two quotes. Quote 1 which includes all associated installation and labour costs including cost of skirting boards Quote 2 which is the same as above but doesn’t include the cost of the skirting boards Please also include expected time to complete the work. We are unable to do early mornings and minimum start time would need to be 9.30am Any day between now and Nov 29 should be fine Many thanks

We require skirting boards removed and replaced (on tiles) with either the same design as the original ones or close to the design. Please refer to photo of current design Could you also note that the $5 stated is not the budget but please kindly send your quote(s) through The height from floor base to top of skirting board is 7cm We would need approximately 20-22 metres of skirting board Could you please provide two quotes. Quote 1 which includes all associated installation and labour costs including cost of skirting boards Quote 2 which is the same as above but doesn’t include the cost of the skirting boards Please also include expected time to complete the work. We are unable to do early mornings and minimum start time would need to be 9.30am Any day between now and Nov 29 should be fine Many thanks

https://www.fantasticfurniture.com.au/Categories/Storage-%26-Office/Storage/Storage-Units/Alfa-5-Shelf-Storage-Unit/p/AFAUTI5SHOOOPABWHI I’m looking for cheap storage space for my apartment and would like the above or similar for my living room. The configuration would be one wall with 4 across and 2 high and on the other just a stack of 2 so 10 in total ($500). I would like them fixed to the wall securely so that there is a space between the bottom shelf and the floor but still will bear maximum weight. I am happy to put them together if you could please give me a price on installation. If you have a cheaper option than this, please let me know. 8-9 weeks till delivery

Require a carpenter or wood craftsman to create a simple wooden chest with a false bottom, hinged lid. The chest should be around 1m in length, approx 50-60cm deep Example of a false bottom attached

Looking for someone to build me a snake enclosure with I'll post a photo doesn't have to be 100% to this design but close enough ^_^.