Find an experienced concreter in Everton Park

Approx 6-8m wall in length. Height vary from 1.0 to 1.4, stairs included. Either blocks or concrete sleeper.

Seeking a quote for a concrete sleeper retaining wall at the front of our property in Everton Park. There are 2 sections: - approx 5.5m long sloped section requiring new retaining wall (0.7 at highest point) - existing retaining wall approx 10m in length (0.7m high) to demolish and replace. - Due date: Before Monday, 8 January 2024

Lay concrete slab and build 3 x 1.5 metre shed. Shed is at property now. Need to supply concrete and any other relevant bracing clips etc. Easy side access to rear garden. Raised garden beds will be removed prior. - Due date: Flexible

We need a small piece of concrete at the front of our steps to be jackhammered / removed. It is 1.6m long x 1.1m wide. Tradie to provide all equipment and take away concrete/scraps. There is access for small machinery (see pictures of driveway).

Excavate and concrete carport and paths

I had some significant stormwater drainage work done recently and 2 bits of the stamped concrete path along the front of our home were cut out. Further with an additional cut of a side cement driveway. Looking at filling in cuts and extending the side cement driveway to the kerb to cover the stormwater drain which has just been replaced. A couple of photos added of cuts. Ideally would like to finish it off with an acid wash and repainting. - Due date: Flexible

Need 2 cuts along 1000mm wide path ..slabs barely 100mm deep. Il remove the gate/posts and remove the concrete once cuts done.

We would like to pay someone with the skills and tools to lay a slightly sloped concrete slab beneath a carport. Slab to fence line side and front, so slightly bigger than the current carport structure. Approx 6.5m x 6m. Location Everton Park. The current old driveway concrete will need to be excavated out. Thank you for considering this work! - Due date: Flexible

The concrete driveway is so slippery. Need to have it resurfaced to increase the traction. - Due date: Flexible

I’m after someone to grind around 40sqm of pebblecrete concrete ready for an epoxy finish to be applied Photo shows an area that has been grinded already - current guy didn’t have heavy enough blades

Afternoon, I require a blocky to lay 150 - 200 series blocks. Concrete footing has been poured with starter bars. 6 m long with 2 returns 3 m long - 12m in total at 1m high. Blocks will be right next to footing. N12 bar can be supplied. Was hoping to have it completed by Wednesday next week??

Fill in with concrete in sections as pictured. One section require framing. Removal off all waste from site. Look forward to hearing from you.