While learning how to stain wood, it is important first to understand the types of stains available. It is a good idea to first check that the stain you are considering is compatible with your wood type. There are two stain types, water and oil-based:<\/span><\/p>\n When it comes to how to apply wood stain, they all require open pores to help with their absorption. If you are applying a stain over a finished surface, the colour of the wood will not change. <\/span><\/p>\n As the existing finish blocks the pores, the stain will not absorb and will wipe off. To ensure your stain takes hold and offers you the look you are after, consider the following tips:<\/span><\/p>\n One of the most popular hardwoods, oak offers a very strong grain pattern with large pores which make the absorption of stain very easy. This is why oak works with a wide variety of stain colours with little risk of it turning blotchy. Oak offers particularly good results if you use a pre-stain wood conditioner first. To ensure you fill oak\u2019s deep pores, use a liberal amount of stain worked in with a cloth and swirling motion.<\/p>\n Poplar is a great option if you want a similar grain pattern to cherry wood with less of a reddish hue. If you use a stain with a red colour in it, the less expensive poplar will give the look of the much higher priced cherry.<\/p>\n Along with oak, you can find poplar used in kitchen cabinets, see here for more\u00a0timber kitchens<\/a> ideas.<\/p>\n When it comes to how to stain pine wood, it is easy to get great results with only a light application of stain. Use a liberal coat of a pre-stain wood conditioner and work with light to medium colours. Be careful when using darker stains as the knots and blemishes will make it hard for even absorption.<\/p>\n This dense and tight-pored wood makes absorbing stain much harder. The grain pattern is uneven, so stains are absorbed in varying degrees. To make things easier, start with a coat of a pre-stain wood conditioner and use a light to medium coloured stain.<\/p>\n This popular hardwood offers dark, rich colours and is full of natural oils, so additional staining is rarely necessary. If you do decide to stain some, use an oil-based stain to ensure a good compatibility with the natural oils.<\/p>\n Once again, this wood does not need much in the way of staining thanks to its distinctive reddish hue. Cherry has a subtle grain pattern and very small pores, so changing its look significantly is quite a task.<\/p>\n Birch is an inexpensive way to replicate the look of the more expensive maple wood, popular in furniture and cabinets. The problem is, this wood does not absorb stain evenly, which is why dark coloured stains are essential. Once again, a pre-stain wood conditioner will make the task much simpler.<\/p>\n Here are some great ideas on how to recreate the <\/span>popular<\/span> farmhouse kitchen <\/span><\/a>look<\/span>\u00a0with some\u00a0<\/span>country kitchen designs and ideas<\/span><\/a>.<\/span><\/p>\n These hardwoods are very similar to oak, so a similar process should be followed. They have large pores for easy absorption of the stain and work with a wide variety of colours with a low-blotch risk. Always use a liberal amount of stain for these woods.<\/p>\n These lightweight hardwoods are growing in popularity as they are affordable and easy to machine. When it comes to staining, however, they are unfortunately difficult. These wood varieties absorb stains unevenly, so to help reduce blotchiness a liberal coat of a pre-stain wood conditioner will be necessary.<\/p>\n When it comes to applying stain, the wood variety and type of stain will determine the best application process. Stains are best applied with a bristle or foam brush, or a cloth. As a general rule, the smaller the pores of the wood, the more stain that will be required.<\/p>\n If you are working with a wood such as oak, which absorbs stain quite easily, the stain should be stain worked in with a cloth and swirling motion. One the other hand, if you are working with a tighter-pored wood such as, hard maple, you will need to apply a significant amount of pressure to ensure the stain is absorbed.<\/p>\n In most cases, prepping your wood with a liberal coat of a pre-stain wood conditioner will make the application process much easier.<\/p>\n All woods require open pores to help with their absorption. If you are applying a stain over a finished surface, the colour of the wood will not change.<\/p>\n For this reason, it is essential to always sand bare wood lightly to open the pores in preparation for staining. It’s a good idea to start with a medium-grit sandpaper, working down to a fine-grit sandpaper, sanding in the direction of the grain each time to avoid scratches.<\/p>\n If you do not sand your wood, the stain will not absorb correctly and likely wipe off easily with a cloth.<\/p>\n It is not necessary to sand between coats of stain. However, if you do take the extra time to do this, it will provide a better finish. The best method for this is to wait until a coat has dried, then use 220 or 240 grit sandpaper to lightly sand surface.<\/p>\n As you do this, you will notice a white film over the finish as you sand. There is no need to worry as this will disappear as you apply the next coat. Always remember, it is vitally important that you do not sand the final coat.<\/p>\n Hopefully, this has given you everything you need to know to change the look of your wooden furniture or various other projects. Once you master how to apply wood stain, you open up a world of possibilities for changing the aesthetic of your home. <\/span><\/p>\n However, if you don’t want to risk potentially ruining some expensive furniture or fittings due to beginner mistakes, you’ll be pleasantly surprised by how many people there are nearby ready to help with wood staining.<\/a> <\/span>They can help with almost any part from<\/span>\u00a0<\/span>floor sanding<\/span><\/a> and\u00a0<\/span>floor polishing<\/span><\/a> to complete <\/span>hardwood flooring care and restoration<\/span><\/a> to breathe new life into your home.<\/span><\/p>\n And let’s not forget the exterior privacy fences<\/a> which look superb when stained black for a dramatic look. Get an extra helping hand with your fence staining<\/a>.<\/p>\n So there you have it, how to stain all different types of timber to give your wooden furniture, or even your entire kitchen, a refresh. If you have any other tips, please let me know in the comments below!<\/p>\n","protected":false},"excerpt":{"rendered":" Learn how to put a professional finishing touch on all of your woodworking projects.<\/p>\n","protected":false},"author":81,"featured_media":20800,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1850,1428],"tags":[215],"language":["en-AU"],"class_list":["post-20313","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-how-to","category-service-guides","tag-handyman"],"acf":[],"yoast_head":"\nOil-based stains<\/span><\/h3>\n
\n
Water-based stains<\/span><\/h3>\n
\n
How to stain wood\u00a0<\/span><\/h2>\n
\n
![\"After](\"https:\/\/airtasker-seo-wordpress-blog-assets-prod.s3.ap-southeast-2.amazonaws.com\/blog\/wp-content\/uploads\/2020\/06\/24061358\/after-wood-stain.jpeg\")
Staining particular types of wood<\/h2>\n
Oak<\/h3>\n
Poplar<\/h3>\n
Pine<\/h3>\n
Hard maple<\/h3>\n
Mahogany<\/h3>\n
Cherry<\/h3>\n
Birch<\/h3>\n
Ash and Chesnut<\/h3>\n
Alder and aspen<\/h3>\n
![\"Stained-wood-floors\"](\"https:\/\/airtasker-seo-wordpress-blog-assets-prod.s3.ap-southeast-2.amazonaws.com\/blog\/wp-content\/uploads\/2020\/06\/24061357\/stained-wood-floors.jpeg\")
Frequently asked questions about staining wood<\/h2>\n
What is the best way to apply a stain?<\/h3>\n
Can you stain wood without sanding?<\/h3>\n
Do you sand between coats of stain?<\/h3>\n
Ready to stain wood like a pro?<\/span><\/h3>\n