Find an experienced cabinet maker near you

I’m looking for a carpenter or cabinet maker to build and install custom sliding pine doors for an angled loft / roof storage space. The opening is approximately 800mm high x 2300mm wide. The finished result should look similar to the reference photos attached, with clean timber / pine sliding panels across the front of the storage area. The job includes: • Measure and confirm the opening on site • Build a simple framed opening for the storage space • Build and fit sliding pine / plywood doors • Install a floor rail / sliding track system • Add a suitable top guide or support if needed • Build side return walls / end panels where required • Make sure the doors slide smoothly and are easy to remove or access • Finish neatly so it suits the existing pine-lined ceiling and loft area The space is under an angled ceiling, so the job will need someone comfortable with custom carpentry rather than standard flat-pack cabinetry. I’m after a practical, neat storage solution, not a high-end wardrobe finish. Happy for the doors to be made from pine ply or similar material, provided the final look is clean and simple. Photos attached show the actual space and examples of the finished result I’m aiming for. Price is for labour. I will pay for the materials you need to collect from Bunnings etc and give me receipt. Please include materials, labour and track hardware price roughly in message.

Hello, I'm looking for someone with experience in cabinetry, built-in wardrobes or joinery to finish an IKEA PAX wardrobe install to make it appear built in and a tidy finish. Scope of works 1. Install infill/filler panels • Fill the gaps between the wardrobe and the side walls with 16mm MR MDF. • Scribe the panels to the walls where required so everything sits flush. • Ideally use moisture-resistant MDF or similar ready for painting. 2. Install a kicker/plinth board • Cover the existing timber base with a neat kicker/plinth with either 16 or 18mm with 16mm MR MDF. • Continue the plinth across the full width so it appears built in. • Minimise visible joins. 3. Finishing • Light sand and prime final cut and fitted pieces • Colour match GRIMO door at Dulux trade centre • Ideally, paint with low sheen Dulux Aquanamel and using high-density foam roller to achieve sprayed-looking texture • Finish neatly against the existing skirting boards and also IKEA base (may require some filling of gaps above plinth / kicker) • Caulk as required. Notes • Wardrobe is already fully assembled and secured. • Photos attached showing the areas to finish. Please only apply if you've completed similar built-in wardrobe or cabinetry work. Photos of previous jobs would be appreciated. Cheers,

We are removing a kitchen to re-use and need assistance from someone with experience in cabinetry and stone bench removal

Need 2 extra drawers added to my dressing table similar to the ones in the bathroom (see photo) and another cupboards doors changed. (Shortened to cupboard height so I can keep them closed when not in use but still have the counter space below the second shelf) At the moment my microwave on the counter comes out to far so the doors can’t be used. Don’t look at the budget. I have no idea if costs so after quotes..

Need an oven surround replaced to fit new oven and base shelf under kitchen sink replaced

Looking for an experienced cabinet maker (not a handyman) to build and install a 450–600 mm wide full-height pantry to match or complement an existing cream kitchen. Future work may include replacing lower cabinet fronts depending on additional costs/ timeframe. Please provide photos of previous kitchen cabinetry projects.

Looking for experienced trades/vendors to help transform a commercial office space into a premium, futuristic gaming lounge and internet cafe. ​We have clear concept designs and need professionals who can execute high-end, custom finishes. ​1. Cabinet Maker / Carpenter Needed For: ​Custom built-in gaming desks with integrated cable management channelling. -​Timber slat/acoustic feature wall panelling -​Custom structural framing, bulkheads, and raised platform flooring sections to conceal heavy wiring ​2. LED Lighting Vendors / Commercial Electricians Needed For: -​Addressable/RGB neon strip lighting integrated seamlessly into custom wall recesses, bulkheads, and floors. -​Custom acrylic neon signage ("THE GRID", "ARCADE", etc.). -​Geometric, modular wall lighting arrays.

Putting a topper on the top of kitchen, 4 x 45 degree angle cuts required

Cabinet Maker Needed to Adjust Kitchen Cabinetry for Stone Benchtop Realignment Looking for an experienced cabinet maker to inspect and adjust existing kitchen cabinetry to allow a stone benchtop to be moved back into its correct position. A stone mason has advised that the cabinetry underneath requires adjustment before the stone can be repositioned. There is currently movement/misalignment in the cabinetry which appears to have contributed to the benchtop shifting and cracking at a join. Scope of Works: Inspect existing kitchen cabinetry and supports. Move and re-level cabinetry as required. Reinforce or adjust cabinet structure to support the stone correctly. Ensure cabinets are level and suitable for the stone mason to reinstall/reposition the benchtop. Advise if any additional cabinet repairs are required.

Looking for a cabinet maker to turn two wardrobes with two doors into sliding doors with mirrors & shelving and draws like my inspiration picture attached. All materials will need to be provided by you so please quote including the doors etc Also would like some shelving and draws in there as well. Will attach an image of what we are liking the look of. Approximately 2mtrs wide.

I need a cabinet-maker to build 2 custom wardrobes in my apartment. I want the same design as the ikea ones but custom sizes. Happy to discuss price if needed

I am looking for someone to go around after the cabinet maker to make all the cupboard doors straight. They all need adjustments

My bottom two drawers have come of their rails, one is completely out and the other doesn’t slide.

Hi there I am working on a new clients home and need some cabinetry made and installed. Please include photos of work you have completed in your offers or comments. Thank you

Cut out a space for a dishwasher under bench in an existing kitchen cabinet. Still need to maintain the appearance of the kitchen. I want to be able to have the remaining cupboard space under the sink as well so a small door or a blank can be installed between the edge of the dishwasher and the next door. Pillar will need to be moved across. I have some photos with the measurements. Dishwasher is 820mm high, 600mm wide and 570 deep. Parking is off street (I have a driveway)

I need a cabinet maker to repair a kitchen cupboard door and review and refit the other hinges in the kitchen to ensure they’re all operating correctly

Hi Guys, need a experienced cabinet maker to install some Cabinetry. Wardrobes, laundry, vanities. Let me know which. One you specialise in and i can forward drawings based on your experience and preferences. Start date 13th April. Most Cabinetry comes pre assembled, the wardrobes are flat packs and tall cabinet like pantry is flat pack.

I recently removed our door panel that usually covers our fridge, because its a bit of a nuisance. I would like to repurpose it to cover the areas around the fridge. The panel is Kaboodle oak latte (melamine faced particle board). I would like someone to measure and cut: 2 x smaller cabinet doors (to go above the fridge) 2 x long vertical strips (to be used either side of the fridge) I would also like the door hinges to be repositioned and installed for the 2 doors. I’ve attached photos to show the existing setup, and a mock-up of what we’re hoping to achieve for clarity.

Wardrobe needs to be removed for repairs behind then put back the next afternoon 195cm x 125cm

I have an AEG Fully integrated Dishwasher that has a loose door panel. Some of the screws have loosened. Have attached pictures